100 x 200mm x 2.4m Oak Sleeper

Metal brace for strengthening corners. Can be used for internal or external corners.
Pre-drilled for use with countersunk screws, countersunk on both sides of fixing hole.
Bright Zinc Plated (BZP) for corrosion resistance.

Thickness: 2.0mm
Width: 24mm
Length: 100mm x 100mm
Drill Holes: 6.0mm (x6)

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

General purpose, pressure treated, sawn finish timber. Mainly used as fence posts but could have many other uses.

- Dimensions: 75 x 75mm x 1.8m
- Homegrown Softwood, locally produced in the UK
- Sawn & incised finish
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green

Do you need timber cut to length? We'll do the hard work for you!

We can cross-cut all of our timber products to length, including our Oak & treated softwood sleepers.

All cross-cutting is to a tolerance of ±2mm. We are only able to offer 90° cuts.

Please note: due to the blade dimensions, approx. 4mm of timber is removed per cut, this is known as the blade kerf E.G. if you start with a 2400mm sleeper and cut off three 600mm lengths, the remaining off-cut will be approx. 588mm long. Please consider this when calculating your requirements.

We will only machine our own timber, if your order requires a lot of machining, please contact us to discuss your requirements.

We are unable to accept returns if products have been cut to order.

When timber has been cut to length we recommend applying end grain preservative to the cut areas. For larger orders that involve a lot of cutting, we recommend our pressure-treatment service. The treatment process takes about one week, price is based on the total volume of timber to be treated, the minimum charge is £80 +VAT (£96 inc. VAT). Contact us for more information.

A metal fixing plate designed for joining sleepers but could have many uses.

- 80mm x 170mm x 2.0mm
- 8 x 8mm diameter fixing holes
- Galvanised finish

Timber batten is a general purpose building material that has many uses for trade and DIY.

- Fine-sawn finish
- Pressure treated green
- This batten does not comply with BS5534, we stock blue batten which does meet this grade.