Metal Gate Hanging Post 115mm x 2.0m

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

Galvanised steel bracket for attaching 75mm triangular Arris Rail to square posts or wall plates. Minimum post/wall plate width is 45mm.

Angle: 62 x 62mm (suits 75mm Arris Rail)
Wings: 42 x 155mm (overall width)
Length: 285mm
Fixing Holes: (10x) 5mm diameter + (2x) 27mm x 6mm slots

Postsaver Pro-Sleeves are a guaranteed, proven solution to ensure long-life fence posts.

The sleeve’s unique dual-layer, rot prevention technology excludes all the factors required for decay to occur at the ground-line. Unlike liquid coatings and bitumen paint, Postsaver Pro Sleeves maintain a barrier to the causes of decay even when the post cracks or splits.

Pro-Sleeves are proven to prevent ground rot with over 26 years of volume use in 30+ countries worldwide. Backed up with 20 years of excellent independent test data, they are easily heat applied with a blowtorch in a matter of seconds, and sleeved posts can be installed in all the usual ways.

Simply fit Postsaver Pro-Sleeves and relax, safe in the knowledge that your posts are protected from rot for 20 years.

Postsaver: Do it Once, Do It Right

Round timber stake, popular for agricultural and equestrian fencing. Can also be used in domestic gardens to support small trees, build garden structures, garden furniture, raised beds, and retaining walls etc. Machine round stakes are regularised to ensure a uniform size. Pressure treated to UC4 standard. These stakes are pointed (for driving in) & chamfered on the top.

- 100mm Diameter x 1.8m (Length includes point)
- Stake; pointed bottom, chamfered top
- Good quality, slow grown redwood
- UC4 pressure treatment, 15 year guarantee

Gravel board packers are fitted to the bottom of a fence post, this ensures the gravel board fits flush with the bottom of the featheredge (when fixing 38 x 88mm rails to the face of the posts).

- 150mm lengths
- Fully pressure treated
- Typically one packer required per post

Rapid setting post hole concrete, suitable for fixing all types of wooden, metal and concrete posts.

Post Mix is a pre-blended, quick setting concrete mix, which sets in approximately 10 minutes after mixing with water (depending on ambient temperature).
Simply half fill the hole with water, then pour the post mix in.

Fencing contractors typically allow 1½ to 2 bags per fence post (this varies depending on the hole and post size).

We offer 33% discount on post-mix when you pay & collect in store!