1200mm Round Top Picket Slat

Premium quality planed 20 x 70 x 1800mm finish Picket Slats.

- Dimensions: 20 x 70 x 1800mm (finished sizes)
- Round top for added elegance
- Planed all around for a smooth finish
- Crafted from premium quality Scandinavian Redwood
- Pressure treated for long-lasting protection with details available in the downloads tab below.

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

Rapid setting post hole concrete, suitable for fixing all types of wooden, metal and concrete posts.

Post Mix is a pre-blended, quick setting concrete mix, which sets in approximately 10 minutes after mixing with water (depending on ambient temperature).
Simply half fill the hole with water, then pour the post mix in.

Fencing contractors typically allow 1½ to 2 bags per fence post (this varies depending on the hole and post size).

We offer 33% discount on post-mix when you pay & collect in store!

- Premium 5th grade Redwood Softwood Decking
- Machined from 38 x 125mm timber to approx. 33 x 120mm
- Dual-sided groove pattern
- Pressure treated green with 15-year warranty
- DeckMark accredited, ideal for easy installation with maximum joist centres of 600mm.

Premium quality planed finish Picket Slats. Machined from 22 x 75mm joinery grade Scandinavian redwood, pressure treated green with a 15 year guarantee. This product can be used as a slat or a rail for small picket panels. Picket Slats are sold individually; build the fence to your own specification.

- Dimensions: 20 x 70 x 1800mm (finished sizes)
- Flat both ends
- Planed all round
- Premium Quality Scandinavian Redwood
- Pressure treated with 15 Year Guarantee - details in downloads tab below

If you would like help to calculate the materials you need, please give us a call 0117 9674382.

Postsaver Pro-Sleeves are a guaranteed, proven solution to ensure long-life fence posts.

The sleeve’s unique dual-layer, rot prevention technology excludes all the factors required for decay to occur at the ground-line. Unlike liquid coatings and bitumen paint, Postsaver Pro Sleeves maintain a barrier to the causes of decay even when the post cracks or splits.

Pro-Sleeves are proven to prevent ground rot with over 26 years of volume use in 30+ countries worldwide. Backed up with 20 years of excellent independent test data, they are easily heat applied with a blowtorch in a matter of seconds, and sleeved posts can be installed in all the usual ways.

Simply fit Postsaver Pro-Sleeves and relax, safe in the knowledge that your posts are protected from rot for 20 years.

Postsaver: Do it Once, Do It Right

This Postsaver is suitable for use on the following post sizes:
• 75 x 75mm
• 75 x 100mm
• 75 x 125mm
• 100 x 100mm

• 75mm Round
• 85mm Round
• 100mm Round