12mm x 151mm Irwin Brad Point Drill Bit

Carriage Bolt; cup square hex, 30mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.

Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.

Supplied with one standard hex nut, washers sold separately.

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

General purpose, pressure treated, sawn finish timber. Mainly used for agricultural post & rail fencing (also known as motorway fencing) and feather-edge fencing.

- Dimensions: 38 x 88mm x 3.0m
- Sawn Finish
- Homegrown Softwood, locally produced in the UK
- Pressure Treated - Green

A heavy duty Close Board fence panel. Made in the U.K. using pressure treated, home grown softwoood.

Height: 1676mm (5'6")
Width: 1829mm (6’)

- 47 x 30mm framework
- ex. 22 x 125mm feather edge
- Nailed construction
- Pressure Treated green
- Finished with planed capping

Timber carcassing, general purpose building timber.

- Machined from 47 x 200mm, finished size approx. 45 x 195mm
- Smooth regularised finish
- Grade C24
- Good quality, slow-grown softwood
- Pressure-treated green

Our carcassing timber is pressure-treated for extended lifespan and protection against insect and fungal attacks.

Sourced from responsibly managed forests in Europe, the majority of our carcassing is milled in Sweden or Latvia where due to the colder climates the timber is slow grown resulting in a denser, straighter end product.

The Highgrove Gate is a good quality treated softwood pedestrian gate that will suit all budgets. It has a frame ledged and braced design with sturdy T&G cladding.

- Width: 915mm (approx. 3’)
- Height: 1830mm (approx. 6’)
- Gate thickness: 45mm
- T&G Cladding (ex. 19 x 125mm)
- Can be hung for left or right-hand opening