Search
Mon-Fri: 7am to 5pm | Sat: 8am to 12pm | Sun: Closed
Show Prices Inc. VAT
Product Catalogue
    Menu Close

    150 x 150mm x 3.6m Incised UC4 Treated Post - Square Ends

    General purpose, pressure treated, sawn finish timber. Mainly used as fence or gate posts but could have many other uses.

    - 150 x 150mm x 3.6m Timber Post
    - Homegrown softwood
    - Fully incised surface for improved treatment penetration
    - UC4 Pressure Treatment - Green
    - Square ends, not weathered
    Availability: 78 in stock
    £58.81 Inc. VAT
    i h

    This 150 x 150mm x 3.6m sawn treated timber post is pressure treated to Use Class 4 (UC4) for structural ground contact.

    Manufactured from homegrown softwood, the timber is fully incised to improve preservative penetration and durability in below-ground applications.

    The 150mm square section provides substantial structural strength, making it suitable for heavy-duty fencinggate posts and other external load-bearing installations. Supplied with square-cut ends (not weathered).

    Explore more in our Posts & Postmix range.

    Products specifications
    FinishSawn
    TreatmentPressure Treated
    MaterialTimber
    Width150mm
    Length3.6m
    Thickness150mm
    *
    *
    *
    *
    Product tags
    Customers that ordered this item also bought:
    Picture of ex. 25 x 125mm x 5.1m Log Lap

    ex. 25 x 125mm x 5.1m Log Lap

    Log-Lap should be installed horizontally.

    - Log Lap Profile
    - Machined from: 25 x 125mm
    - Finished thickness: 20.5mm (at thickest point)
    - Board coverage when fitted: 105mm
    - High quality, slow grown redwood
    - Pressure Treated (green), 15 year performance warranty - view the Downloads tab below for details
    - We recommend this profile is installed horizontally
    - 9.52 linear metres are needed to cover 1m²
    Stock Availability: 177 in stock
    From £13.90 Inc. VAT
    Picture of 47 x 150mm x 4.8m C24 - Treated

    47 x 150mm x 4.8m C24 - Treated

    Treated timber carcassing.
    - Machined from 47 x 150mm, finished size approx. 45 x 145mm
    - Smooth regularised finish
    - Grade C24
    - Good quality, slow-grown softwood
    - Pressure-treated green

    Our carcassing timber is pressure-treated for extended lifespan and protection against insect and fungal attacks.

    Sourced from responsibly managed forests in Europe, the majority of our carcassing is milled in Sweden or Latvia where due to the colder climates the timber is slow grown resulting in a denser, straighter end product.
    Stock Availability: 277 in stock
    £22.94 Inc. VAT
    Picture of ex. 19 x 100mm x 3.9m T&G

    ex. 19 x 100mm x 3.9m T&G

    A popular treated softwood T&G cladding with many uses: making gates, doors, sheds & other garden structures, cladding to cover old brickwork, premium fencing etc.
    Produced from good quality redwood and pressure treated (Green) for outdoor durability.

    - PTGV Profile (Planed Tongue & Groove, with a 'V' joint)
    - Machined from: 19 x 100mm
    - Finished thickness: 14mm
    - Board coverage when fitted: 85mm
    - High quality, slow grown redwood
    - Pressure Treated (green), 15 year performance warranty - view the Downloads tab below for details
    - We recommend this profile is installed vertically
    - 11.76 linear metres are needed to cover 1m²
    Stock Availability: 304 in stock
    From £7.08 Inc. VAT
    Picture of Remix Coarse Rapid Setting Post-Mix 20kg

    Remix Coarse Rapid Setting Post-Mix 20kg

    Rapid setting post hole concrete, suitable for fixing all types of wooden, metal and concrete posts.

    Post Mix is a pre-blended, quick setting concrete mix, which sets in approximately 10 minutes after mixing with water (depending on ambient temperature).
    Simply half fill the hole with water, then pour the post mix in.

    Fencing contractors typically allow 1½ to 2 bags per fence post (this varies depending on the hole and post size).

    We offer 33% discount on post-mix when you pay & collect in store!
    Stock Availability: 1585 in stock
    £8.59 Inc. VAT
    Picture of 47 x 150mm x 3.0m C24 - Treated

    47 x 150mm x 3.0m C24 - Treated

    Treated carcassing timber conquers outdoor projects!
    - Machined from 47 x 150mm, finished size approx. 45 x 145mm
    - Smooth finish and C24 graded
    - Premium quality, slow-grown softwood
    - Pressure-treated green for durability
    Stock Availability: 359 in stock
    £14.34 Inc. VAT
    Picture of Postsaver Pro-Wrap Size 2 (Fits 75x150mm - 150x150mm posts)

    Postsaver Pro-Wrap Size 2 (Fits 75x150mm - 150x150mm posts)

    Postsaver Pro-Sleeves are a guaranteed, proven solution to ensure long-life fence posts.

    The sleeve’s unique dual-layer, rot prevention technology excludes all the factors required for decay to occur at the ground-line. Unlike liquid coatings and bitumen paint, Postsaver Pro Sleeves maintain a barrier to the causes of decay even when the post cracks or splits.

    Pro-Sleeves are proven to prevent ground rot with over 26 years of volume use in 30+ countries worldwide. Backed up with 20 years of excellent independent test data, they are easily heat applied with a blowtorch in a matter of seconds, and sleeved posts can be installed in all the usual ways.

    Simply fit Postsaver Pro-Sleeves and relax, safe in the knowledge that your posts are protected from rot for 20 years.

    Postsaver: Do it Once, Do It Right

    This Postsaver is suitable for use on the following post sizes:
    • 75 x 150mm
    • 100 x 125mm
    • 125 x 125mm
    • 150 x 150mm

    • 150mm Round
    Stock Availability: 78 in stock
    £5.47 Inc. VAT