150mm Light Cabin Hook - Galvanised

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

Rapid setting post hole concrete, suitable for fixing all types of wooden, metal and concrete posts.

Post Mix is a pre-blended, quick setting concrete mix, which sets in approximately 10 minutes after mixing with water (depending on ambient temperature).
Simply half fill the hole with water, then pour the post mix in.

Fencing contractors typically allow 1½ to 2 bags per fence post (this varies depending on the hole and post size).

We offer 33% discount on post-mix when you pay & collect in store!

Treated timber carcassing for general building projects.
- Machined from 47 x 100mm, finished size approx. 45 x 95mm
- Smooth regularised finish
- Grade C24
- Good quality, slow grown softwood
- Pressure treated green

General purpose, pressure treated, sawn finish timber. Mainly used as fence posts but could have many other uses.

- Dimensions: 100 x 100mm x 2.4m
- Sawn Finish
- Homegrown Softwood, locally produced in the UK
- Pressure Treated - Green

This post support is designed to hold a 100 x 100mm square wooden post in position when it’s not possible to concrete a post into the ground. The bolt-clamp on the side of the post support ensures a quick and secure fit. The rectangular base plate enables flush fitting next to walls/obstructions, it's also a good fit when mounted on top of walls.

- Designed to fit 100 x 100mm square wooden posts
- Bolt-Grip post securing system
- Bolt down plate: 108mm x 205mm - flush fitting
- Bolt holes: 4 x 12mm Ø holes for bolting down the base
- Manufactured from 2mm thick steel
- Welded construction
- Galvanised finish for durability outdoors

The Babington gate is a good quality treated softwood feather-edge pedestrian gate that will suit all budgets. It has a strong mortice and tenoned, frame ledged and braced design with sturdy feather-edge cladding. This gate doesn't have capping; there isn’t a top or bottom; the gate can be turned to match the direction of feather-edge fencing if needed.

- Width: 900mm (approx. 3’)
- Height: 1760mm (approx. 6’)
- Gate thickness: 45mm
- Feather-edge cladding (ex. 22 x 125mm)
- Can be hung for left or right-hand opening