Search
Mon-Fri: 7am to 5pm | Sat: 8am to 12pm | Sun: Closed
Show Prices Inc. VAT
Product Catalogue
    Menu Close

    15mm Hex Socket ½" Drive

    Manufacturer: Faithfull
    The Faithfull ½ inch Drive Hex Sockets are forged from Chrome-Vanadium steel, hardened, tempered and satin chrome plated for corrosion protection.

    Faithfull sockets feature a hexagon design for precise fitting on both nuts and bolts, while the chamfered end facilitates easy nut placement and entry.
    Availability: 2 in stock
    £2.50 Inc. VAT
    i h

    The Faithfull ½ inch Drive Hex Sockets are forged from Chrome-Vanadium steel, hardened, tempered and satin chrome plated for corrosion protection.


    Faithfull sockets feature a hexagon design for precise fitting on both nuts and bolts, while the chamfered end facilitates easy nut placement and entry.

    *
    *
    *
    *
    Customers that ordered this item also bought:
    Picture of 2.1m Feather Edge Board

    2.1m Feather Edge Board

    125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
    Feather-edge can also be fitted horizontally as a budget cladding.

    - 125mm Board Width
    - 10 boards needed per linear metre (25mm overlap)
    - Cut from 22 x 125mm
    - Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
    - Homegrown Spruce
    - Sawn finish
    - Pressure treated green
    Stock Availability: 4027 in stock
    From £1.85 Inc. VAT
    Picture of M8 x 130mm Masonry Bolt

    M8 x 130mm Masonry Bolt

    A self tapping bolt suitable for concrete, stone, brick, marble, wood and block (solid or hollow). Safe anchorage achieved without the need of high tightening forces. Can be removed and re-fixed into the same hole, providing the thread is correctly aligned. No expansion forces enables close to the edge fixing.

    Drill Bit Dia. - 8mm
    Anchor Length - 130mm
    Washer Size - 10mm (M10)
    Min Hole Depth - 55mm
    Min Over Drill Depth - 15mm
    Min. Embed Depth - 40mm
    Max. Fixture Thickness - 90mm
    Drill Bit Dia. for clearance - 10mm (to prevent binding when tightening bolt)
    Head Type - Hex Head, 15mm (Across Flats)
    Driver Type - Impact driver, socket, spanner
    Max Tightening Torque - 40Nm
    Stock Availability: 198 in stock
    From £1.18 Inc. VAT
    Picture of M10 Form C Washer

    M10 Form C Washer

    A heavy steel washer, for general use with bolts and threaded bar (studding).
    BZP (Bright Zinc Plate) finish.

    Dimensions: 2mm x 24mm Diameter
    11mm Bolt Hole: To suit M10 thread
    Stock Availability: 341 in stock
    From £0.12 Inc. VAT
    Picture of 38 x 88mm x 4.8m Sawn Treated Rail

    38 x 88mm x 4.8m Sawn Treated Rail

    General purpose, pressure treated, sawn finish timber. Mainly used for agricultural post & rail fencing (also known as motorway fencing) and feather-edge fencing.

    - Dimensions: 38 x 88mm x 4.8m
    - Sawn Finish
    - Homegrown Softwood, locally produced in the UK
    - Pressure Treated - Green
    Stock Availability: 901 in stock
    £9.97 Inc. VAT
    Picture of 75 x 75mm x 1.8m Incised UC4 Treated Post

    75 x 75mm x 1.8m Incised UC4 Treated Post

    General purpose, pressure treated, sawn finish timber. Mainly used as fence posts but could have many other uses.

    - Dimensions: 75 x 75mm x 1.8m
    - Homegrown Softwood, locally produced in the UK
    - Sawn & incised finish
    - Fully incised surface for improved treatment penetration
    - UC4 Pressure Treatment - Green
    Stock Availability: 708 in stock
    £7.00 Inc. VAT
    Picture of Rebated Fence Capping

    Rebated Fence Capping

    Enhance your Feather Edge fence with our Rebated Fence Capping, crafted from premium Scandinavian Redwood. Providing both a quality finishing touch and additional protection, this capping is pressure treated green for longevity. See full product description below.
    Stock Availability: 1218 in stock
    £6.91 Inc. VAT