Products tagged with '18'

Specialist field gate hinge with the eye on the corner of the hinge.
The off set hinge has the eye set at approximately 45 degree angle from the corner of the hinge.

Fits a 19mm hanging pin.

Hanging pins & fixings are sold separately.

Please note that this item is not stocked.
Nationwide delivery is available on this product, call 0117 967 4382 for details or submit a contact form below. Product code: 7IFGTBOEC125

Specialist field gate hinge with the eye on the corner of the hinge.

Fits a 19mm hanging pin.

Hanging pins & fixings are sold separately.

Please note that this item is not stocked.
Nationwide delivery is available on this product, call 0117 967 4382 for details or submit a contact form below. Product code: 7IFGTBSEC125

Available painted black or hot dip galvanised to ensure resistance to corrosion & rust, these hook & band hinges are ideal for hanging heavy duty gates & doors.
The crank allows the gate to sit flush with the post if hanging on the front or the back of the post.

As a general rule we recommend using hinges that cover half the width of the gate/door.
Fixings sold separately.

Available painted black or hot dip galvanised to ensure resistance to corrosion & rust, these hook & band hinges are ideal for hanging heavy duty gates & doors.
The crank allows the gate to sit flush with the post if hanging on the front or the back of the post.

As a general rule we recommend using hinges that cover half the width of the gate/door.
Fixings sold separately.

Heavy-duty galvanised double strap top band for 75mm thick five bar gate.

- Length: 450mm
- Depth: 50mm
- Internal Width: 75mm
- Hanging eye for 19mm hook
- Three bolt holes to suit M10 carriage bolts
- Galvanised finish

Hanging pins and fixings sold separately.

A pair of heavy-duty gate hinges suitable for hanging gates, shed doors etc. Cups are fitted to the top & bottom of the hinge pivot, which secures the gate firmly in position and prevents the gate from being lifted or removed. Galvanised finish for long service life. Fixings are sold separately, contact us if you would like to add fixings to your order.

Dimensions:
Cups: 65 x 65mm
Length excluding pivot: 440mm
Length including pivot: 465mm
Pivot: 15mm diameter
Hinge width: 48mm
Hinge depth: 4mm
Screw holes (x3): 7mm diameter, countersunk
Bolt hole: 14 x 14mm (use M12 carriage bolt, cup square hex)

Hot dip galvanised to ensure resistance to corrosion & rust, these hook & band hinges for suitable for hanging heavy duty gates & doors.
As a general rule we recommend using hinges that cover half the width of the gate/door.

Fixings sold separately.

The use of drop bolts is recommended on most gate installations as it helps to prevent the gate from twisting at the bottom.
The bolt can also be used to hold the gate open if required.

The use of drop bolts is recommended on most gate installations as it helps to prevent the gate from twisting at the bottom.
The bolt can also be used to hold the gate open if required.