19 x 38mm x 4.8m Treated Batten

Metal brace for strengthening corners. Can be used for internal or external corners.
Pre-drilled for use with countersunk screws, countersunk on both sides of fixing hole.
Bright Zinc Plated (BZP) for corrosion resistance.

Thickness: 1.5mm
Width: 16mm
Length: 50mm x 50mm
Fixing Holes: 5.0mm (x4)

19 x 125mm Shiplap is popular cladding often used by shed manufacturers to build heavier duty structures such as garden workshops, premium quality sheds, summerhouses, bike stores etc.

- Machined from: 19 x 125mm
- Finished Thickness: 14mm
- Fitted Coverage: 105mm
- High quality, slow grown redwood
- Pressure Treated (green), 15 year performance warranty - view the Downloads tab below for details
- We recommend this profile is installed horizontally
- 9.52 linear metres are needed to cover 1m²

A heavy duty treated softwood cladding often used to build sheds & other garden structures. Produced from good quality redwood and pressure treated (Green) for outdoor durability.

- Machined from: 25 x 150mm
- Finished thickness: 20.5mm
- Board coverage when fitted: 126mm
- High quality, slow grown redwood
- Pressure Treated (green), 15 year performance warranty - view the Downloads tab below for details
- We recommend this profile is installed vertically
- 7.94 linear metres are needed to cover 1m²

A mild steel plate with fixing holes used for strengthening and repairs.
Pre-drilled fixing holes for use with countersunk screws. Bright Zinc Plated (BZP) for corrosion resistance.

Thickness: 2.0mm
Width: 19mm
Length: 100mm
Fixing Holes: 5.0mm (x4)

A heavy duty treated softwood cladding often used to build sheds & other garden structures. Produced from good quality redwood and pressure treated (Green) for outdoor durability.

- Machined from: 25 x 150mm
- Finished thickness: 20.5mm
- Board coverage when fitted: 126mm
- High quality, slow grown redwood
- Pressure Treated (green), 15 year performance warranty - view the Downloads tab below for details
- We recommend this profile is installed vertically
- 7.94 linear metres are needed to cover 1m²

25 x 175mm PSE (Planed, Square-Edge); quality Scandinavian redwood with a planed finish, kiln-dried prior to pressure treatment. This product is suitable for external joinery, it has many uses e.g. floor boards, balustrading, fascia boards, sofit boards etc. We recommend acclimatising this timber prior to installation, this will prevent issues relating to shinkage.

- Machined from 25 x 175mm, finished size approx. 20 x 170mm
- PSE: Planed, Square-Edge
- Good quality, slow grown redwood
- Pressure treated green