200mm Large Heavy Duty Ring Latch - Galvanised

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

A heavy steel washer, for general use with bolts and threaded bar (studding).
BZP (Bright Zinc Plate) finish.

Dimensions: 2mm x 28mm Diameter
13mm Bolt Hole: To suit M12 thread

450mm Metal Peg, also known as a metal fence pin. This sturdy steel peg is suitable for path and edging, and for securing fencing gravel boards. The small profile of the peg makes it easier to drive into hard ground than the larger timber equivalent.

- 25mm x 25mm Steel Angle
- 2.0mm Thick Steel
- Galvanised
- Pointed to drive
- Three 6mm diameter holes in the corner for fixings

Pressure-treated timber gravel boards in Bristol, suitable for a range of outdoor applications.

These versatile, homegrown softwood boards are strong, durable, and ideal for many DIY garden projects.

- 22 x 200mm x 4.8m
- Sawn finish
- Pressure treated
- Quick Bristol delivery

Strong timber gravel boards in Bristol, pressure-treated for long-lasting outdoor use.

These versatile, homegrown softwood boards are strong, durable, and ideal for a variety of garden projects. Available for Bristol delivery.
- 36 x 150mm x 3.6m
- Sawn finish
- Pressure treated

Carriage Bolt; cup square hex, 30mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.

Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.

Supplied with one standard hex nut, washers sold separately.