20mm Clean Stone Chippings

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

- Showcasing a groove pattern on both sides for improved visual appeal and functionality.
- Fashioned from high-quality Redwood, guaranteeing strength and longevity.
- Treated with green pressure for added durability, supported by a 15-year Treated-Right Warranty.
- Allows for maximum joist spacing of 600mm, facilitating effortless installation.
- Available since 2002, highlighting its unwavering popularity and exceptional quality.

Planed and pressure-treated, joinery grade softwood.
Build your own contemporary slatted screen fencing. Create heavy duty and decorative fencing screens, perfect for fence panels to create partitions, obscure visibility, pergola shade screens, a contemporary way to increase the height of fencing & garden walls.

- Planed all round timber, with 4 eased (rounded) corners
- Machined from 25 x 50mm, finished size 20 x 45mm
- 2.4m long ±5mm
- High quality, slow grown redwood
- Pressure Treated green, 15 year Treat-Right Warranty, details in Downloads tab below
- 18.2 linear metres needed to cover 1m², this is based on a 10mm gap between slats

If you need help with your calculations for your screening project, please get in touch.

Timber carcassing, general purpose building timber.

- Machined from 47 x 50mm, finished size approx. 45 x 45mm
- Smooth regularised finish
- Good quality, slow grown softwood
- Pressure treated green

A metal stake (pin) designed for installation of timber sleepers, use them to build raised beds and timber garden edging. The sturdy but slim profile of the pin is easy to drive into hard ground.

- Total Length: 440mm
- Stake Profile: 35mm x 35mm x 2.0mm
- Fixing plate: 75mm x 117mm (overall)
- Fixing Holes: 4 x 8mm diameter
- Galvanised finish

Timber carcassing, general purpose building timber.

- Machined from 47 x 50mm, finished size approx. 45 x 45mm
- Smooth regularised finish
- Good quality, slow grown softwood
- Pressure treated green