20mm Galvanised Staple - 500g Bag (Approx. 540)

Rapid setting post hole concrete, suitable for fixing all types of wooden, metal and concrete posts.

Post Mix is a pre-blended, quick setting concrete mix, which sets in approximately 10 minutes after mixing with water (depending on ambient temperature).
Simply half fill the hole with water, then pour the post mix in.

Fencing contractors typically allow 1½ to 2 bags per fence post (this varies depending on the hole and post size).

We offer 33% discount on post-mix when you pay & collect in store!

Concrete gravel boards slot between concrete posts to give fence panels a level surface to sit on. It is beneficial to use gravel boards if the ground is sloping; the gravel board is dug into the ground to create a level surface instead of digging in the fence panel. Raising the panel on a gravel board will help prevent rot caused by ground moisture, gravel boards also help to prevent damage to fence panels caused by lawn mowers and strimmers.

- Dimensions: 45mm x 150mm x 1829mm
- 20kg Each
- C50 Concrete (a strong mix)
- Two 5.5mm rebar set inside.

2.7m slotted concrete post; fully slotted on both sides in a "H" design for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 2700mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 52kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

Light duty round timber stake, popular for use as tree stakes to support small trees and shrubs, also suitable for light duty or temporary fencing. Machine rounded stakes are regularised to ensure a uniform size. Pressure treated to UC4 standard. These stakes are pointed (for driving in) & chamfered on the top.

- 50mm Diameter x 1.8m (Length includes point)
- Stake; pointed bottom, chamfered top
- Good quality, slow grown redwood
- UC4 pressure treatment, 15 year guarantee

Fine sawn finish timber post cap for 100 x100mm posts, pressure treated green. Protects post ends from weather and provides a smart finishing touch.

- Dimensions: 26mm x 119mm x 119mm
- Chamfered four sides
- Pressure treated

Round timber stake, popular for agricultural and equestrian fencing. Can also be used in domestic gardens to support small trees, build garden structures, garden furniture, raised beds, and retaining walls etc. Machine round stakes are regularised to ensure a uniform size. Pressure treated to UC4 standard. These stakes are pointed (for driving in) & chamfered on the top.

- 75mm Diameter x 1.8m (Length includes point)
- Stake; pointed bottom, chamfered top
- Good quality, slow grown redwood
- UC4 pressure treatment, 15 year guarantee