2.7m Slotted Concrete Post

Rapid setting post hole concrete, suitable for fixing all types of wooden, metal and concrete posts.

Post Mix is a pre-blended, quick setting concrete mix, which sets in approximately 10 minutes after mixing with water (depending on ambient temperature).
Simply half fill the hole with water, then pour the post mix in.

Fencing contractors typically allow 1½ to 2 bags per fence post (this varies depending on the hole and post size).

We offer 33% discount on post-mix when you pay & collect in store!

Concrete gravel boards slot between concrete posts to give fence panels a level surface to sit on. It is beneficial to use gravel boards if the ground is sloping; the gravel board is dug into the ground to create a level surface instead of digging in the fence panel. Raising the panel on a gravel board will help prevent rot caused by ground moisture, gravel boards also help to prevent damage to fence panels caused by lawn mowers and strimmers.

- Dimensions: 45mm x 150mm x 1829mm
- 20kg Each
- C50 Concrete (a strong mix)
- Two 5.5mm rebar set inside.

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

Concrete gravel boards slot between concrete posts to give fence panels a level surface to sit on. It is beneficial to use gravel boards if the ground is sloping; the gravel board is dug into the ground to create a level surface instead of digging in the fence panel. Raising the panel on a gravel board will help prevent rot caused by ground moisture, gravel boards also help to prevent damage to fence panels caused by lawn mowers and strimmers.

- Dimensions: 45mm x 300mm x 1829mm
- 44kg Each
- C50 Concrete (a strong mix)
- Three 5.5mm rebar set inside.

Planed and pressure-treated, joinery grade softwood.

Build your own contemporary slatted screen fencing. Create heavy duty and decorative fencing screens, perfect for fence panels to create partitions, obscure visibility, pergola shade screens, a contemporary way to increase the height of fencing & garden walls.

- Planed all round timber, with 2 eased (rounded) corners
- Machined from 25 x 75mm, finished size 20 x 70mm
- High quality, slow grown redwood
- Pressure Treated green, 15 year Treat-Right Warranty, details in Downloads tab below
- 12.5 linear metres needed to cover 1m², this is based on a 10mm gap between slats
- We recommend fitting vertical battens at 600mm centres (max.)

If you need help to work out what you need for your screening project, please get in touch.

The Highgrove Tongue and Groove (V-joint) fence panel is a premium quality product, hand made in the U.K. It is made with planed finish, joinery grade, pressure treated redwood and has stainless steel fixings. This high-spec. product is very sturdy and built to last, offering a long-term, cost-effective fencing solution. We also stock a matching Highgrove pedestrian gate.

Height: 1829mm (6')
Width: 1829mm (6')

- Heavy Duty,
- Top & Bottom Rails: 45 x 95mm
- Intermediate Battens: 27 x 45mm
- Tongue & Groove (V-joint) cladding: ex. 19 x 125mm (approx. 14 x 115mm finished size)
- Planed finish, joinery grade redwood,
- Stainless steel fixings
- Pressure Treated with 15 year Treat-Right Warranty (view details in Downloads tab below)