300mm Brenton Bolt Galvanised

Pressure-treated decking boards, perfect for paths, fences and more.
These versatile, homegrown softwood boards are strong, durable, and ideal for a variety of garden projects. Available for fast Bristol delivery.

- 22 x 150mm x 1.83m
- Sawn finish
- Pressure treated

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

A heavy duty Close Board fence panel. Made in the U.K. using pressure treated, home grown softwoood.

Height: 1829mm (6')
Width: 1829mm (6’)

- 47 x 30mm framework
- ex. 22 x 125mm feather edge
- Nailed construction
- Pressure Treated green
- Finished with planed capping

2.7m slotted concrete post; fully slotted on both sides in a "H" design for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 2700mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 52kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

Concrete gravel boards slot between concrete posts to give fence panels a level surface to sit on. It is beneficial to use gravel boards if the ground is sloping; the gravel board is dug into the ground to create a level surface instead of digging in the fence panel. Raising the panel on a gravel board will help prevent rot caused by ground moisture, gravel boards also help to prevent damage to fence panels caused by lawn mowers and strimmers.

- Dimensions: 45mm x 150mm x 1829mm
- 20kg Each
- C50 Concrete (a strong mix)
- Two 5.5mm rebar set inside.

450mm Metal Peg, also known as a metal fence pin. This sturdy steel peg is suitable for path and edging, and for securing fencing gravel boards. The small profile of the peg makes it easier to drive into hard ground than the larger timber equivalent.

- 25mm x 25mm Steel Angle
- 2.0mm Thick Steel
- Galvanised
- Pointed to drive
- Three 6mm diameter holes in the corner for fixings