Search
Mon-Fri: 8am to 5pm | Sat: 8am to 12pm | Sun: Closed
Show Prices Inc. VAT
Product Catalogue
    Menu Close

    3.5 x 32mm Stainless Steel Tongue-Tite Screws - Box 200

    These Stainless Steel lost-head screws are similar in size to a lost-head nail. They are designed to be used as a hidden fixing for tongue & groove flooring and timber cladding but are perfect for many other projects. Tongue-Tite Plus is intended to be installed at a 30-45 degree angle through the tongue of the board, allowing the groove to fit over the head of the screw. This screw can also be used to face-fix boards, the small head is barely visible when when driven just below the timber surface.

    Tongue-Tite Plus is a stainless steel screw which is suitable for internal & external use. These screws have a narrow countersunk head with TX10 drive.
    Its' single course thread has been designed to eliminate the ream out of the timber, giving high pull out retention, which helps to prevent squeaky floor boards.
    The torx drive provides grip and control when fitting, the narrow countersunk head gives a neat flush fix to allow the next board to sit in place.

    TX10 screwdriver bit included in the box.
    Screw Head Diameter = 4.5mm
    Availability: 41 in stock
    £11.95 Inc. VAT
    i h

    These Stainless Steel lost-head screws are similar in size to a lost-head nail. They are designed to be used as a hidden fixing for tongue & groove flooring and timber cladding but are perfect for many other projects. Tongue-Tite Plus is intended to be installed at a 30-45 degree angle through the tongue of the board, allowing the groove to fit over the head of the screw. This screw can also be used to face-fix boards, the small head is barely visible when when driven just below the timber surface.


    Tongue-Tite Plus is a stainless steel screw which is suitable for internal & external use. These screws have a narrow countersunk head with TX10 drive.
    Its' single course thread has been designed to eliminate the ream out of the timber, giving high pull out retention, which helps to prevent squeaky floor boards.
    The torx drive provides grip and control when fitting, the narrow countersunk head gives a neat flush fix to allow the next board to sit in place.


    TX10 screwdriver bit included in the box.
    Screw Head Diameter = 4.5mm

    Products specifications
    MaterialStainless Steel
    FinishStainless Steel
    Screw Head TypeCountersunk - T10 Drive
    Length32mm
    Diameter3.5mm
    *
    *
    *
    *
    Customers that ordered this item also bought:
    Picture of ex. 25 x 50mm x 3.9m Planed, 4 Eased Corners - Treated

    ex. 25 x 50mm x 3.9m Planed, 4 Eased Corners - Treated

    Planed and pressure-treated, joinery grade softwood.
    Build your own contemporary slatted screen fencing. Create heavy duty and decorative fencing screens, perfect for fence panels to create partitions, obscure visibility, pergola shade screens, a contemporary way to increase the height of fencing & garden walls.

    - Planed all round timber, with 4 eased (rounded) corners
    - Machined from 25 x 50mm, finished size 20 x 45mm
    - High quality, slow grown redwood
    - Pressure Treated green, 15 year Treat-Right Warranty, details in Downloads tab below
    - 18.2 linear metres needed to cover 1m², this is based on a 10mm gap between slats

    If you need help to work out what you need for your screening project, please get in touch.
    Stock Availability: 4074 in stock
    £4.80 Inc. VAT
    Picture of 1.8m Feather Edge Board

    1.8m Feather Edge Board

    125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
    Feather-edge can also be fitted horizontally as a budget cladding.

    - 125mm Board Width
    - 10 boards needed per linear metre (25mm overlap)
    - Cut from 22 x 125mm
    - Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
    - Homegrown Spruce
    - Sawn finish
    - Pressure treated green
    Stock Availability: 13547 in stock
    From £1.43 Inc. VAT
    Picture of ex. 19 x 100mm x 1.95m T&G

    ex. 19 x 100mm x 1.95m T&G

    A popular treated softwood T&G cladding with many uses: making gates, doors, sheds & other garden structures, cladding to cover old brickwork, premium fencing etc.
    Produced from good quality redwood and pressure treated (Green) for outdoor durability.

    - PTGV Profile (Planed Tongue & Groove, with a 'V' joint)
    - Machined from: 19 x 100mm
    - Finished thickness: 14mm
    - Board coverage when fitted: 85mm
    - High quality, slow grown redwood
    - Pressure Treated (green), 15 year performance warranty - view the Downloads tab below for details
    - This cladding product is CladMark accredited.
    - We recommend this profile is installed vertically
    - 11.76 linear metres are needed to cover 1m²
    Stock Availability: 623 in stock
    From £3.54 Inc. VAT
    Picture of 19 x 38mm x 4.2m Treated Batten

    19 x 38mm x 4.2m Treated Batten

    Timber batten is a general purpose building material that has many uses for trade and DIY.

    - Fine-sawn finish
    - Pressure treated green
    Stock Availability: 1977 in stock
    £2.20 Inc. VAT
    Picture of 1.05m Feather Edge Board

    1.05m Feather Edge Board

    125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
    Feather-edge can also be fitted horizontally as a budget cladding.

    - 125mm Board Width
    - 10 boards needed per linear metre (25mm overlap)
    - Cut from 22 x 125mm
    - Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
    - Homegrown Spruce
    - Sawn finish
    - Pressure treated green
    Stock Availability: 2905 in stock
    From £0.83 Inc. VAT
    Picture of M8 x 100mm Thunder Bolt

    M8 x 100mm Thunder Bolt

    A self tapping bolt suitable for concrete, stone, brick, marble, wood and block (solid or hollow). Safe anchorage achieved without the need of high tightening forces. Can be removed and re-fixed into the same hole, providing the thread is correctly aligned. No expansion forces enables close to the edge fixing.

    Drill Bit Dia. - 8mm
    Anchor Length - 100mm
    Washer Size - 10mm (M10)
    Min Hole Depth - 55mm
    Min Over Drill Depth - 15mm
    Min. Embed Depth - 40mm
    Max. Fixture Thickness - 60mm
    Drill Bit Dia. for clearance - 10mm (to prevent binding when tightening bolt)
    Head Type - Hex Head, 15mm (Across Flats)
    Driver Type - Impact driver, socket, spanner
    Max Tightening Torque - 40Nm
    Stock Availability: 237 in stock
    From £0.94 Inc. VAT