Personal menu

3.5 x 60mm Stainless Steel Tongue-Tite Screws - Box 200

These Stainless Steel lost-head screws are similar in size to a lost-head nail. They are designed to be used as a hidden fixing for tongue & groove flooring and timber cladding but are perfect for many other projects. Tongue-Tite Plus is intended to be installed at a 30-45 degree angle through the tongue of the board, allowing the groove to fit over the head of the screw. This screw can also be used to face-fix boards, the small head is barely visible when when driven just below the timber surface.

Tongue-Tite Plus is a stainless steel screw which is suitable for internal & external use. These screws have a narrow countersunk head with TX10 drive.
Its' single course thread has been designed to eliminate the ream out of the timber, giving high pull out retention, which helps to prevent squeaky floor boards.
The torx drive provides grip and control when fitting, the narrow countersunk head gives a neat flush fix to allow the next board to sit in place.

TX10 screwdriver bit included in the box.
Screw Head Diameter = 4.5mm

Availability: 25 in stock

£16.79 Inc. VAT

Qty:

i h

Description
Specifications
Contact Us

Tongue-Tite Plus is a stainless steel screw which is suitable for internal & external use. These screws have a narrow countersunk head with TX10 drive.
Its' single course thread has been designed to eliminate the ream out of the timber, giving high pull out retention, which helps to prevent squeaky floor boards.
The torx drive provides grip and control when fitting, the narrow countersunk head gives a neat flush fix to allow the next board to sit in place.

TX10 screwdriver bit included in the box.
Screw Head Diameter = 4.5mm

Products specifications

Material	Stainless Steel
Finish	Stainless Steel
Screw Head Type	Countersunk - T10 Drive
Length	60mm
Diameter	3.5mm

Your name *

Your email *

Subject: *

Enquiry *

Customers that ordered this item also bought:

2.1m Feather Edge Board

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

Stock Availability: 2138 in stock

From £1.72 Inc. VAT

Coarse Rapid Setting Post-Mix 20kg

Rapid setting post hole concrete, suitable for fixing all types of wooden, metal and concrete posts.

Post Mix is a pre-blended, quick setting concrete mix, which sets in approximately 10 minutes after mixing with water (depending on ambient temperature).
Simply half fill the hole with water, then pour the post mix in.

Fencing contractors typically allow 1½ to 2 bags per fence post (this varies depending on the hole and post size).

We offer 33% discount on post-mix when you pay & collect in store!

Stock Availability: 2655 in stock

£8.22 Inc. VAT

47 x 75mm x 3.6m C16/C24 - Treated

Treated carcassing timber for general purpose building.
- Machined from 47 x 75mm, finished size approx. 45 x 70mm
- Smooth regularised finish
- Grade C16 / C24 - mixed
- Good quality, slow grown softwood
- Pressure treated green

Stock Availability: 458 in stock

£7.49 Inc. VAT

ex. 25 x 50mm x 3.9m Planed, 4 Eased Corners - Treated

Planed and pressure-treated, joinery grade softwood.
Build your own contemporary slatted screen fencing. Create heavy duty and decorative fencing screens, perfect for fence panels to create partitions, obscure visibility, pergola shade screens, a contemporary way to increase the height of fencing & garden walls.

- Planed all round timber, with 4 eased (rounded) corners
- Machined from 25 x 50mm, finished size 20 x 45mm
- High quality, slow grown redwood
- Pressure Treated green, 15 year Treat-Right Warranty, details in Downloads tab below
- 18.2 linear metres needed to cover 1m², this is based on a 10mm gap between slats

If you need help to work out what you need for your screening project, please get in touch.

Stock Availability: 4101 in stock

£4.80 Inc. VAT

ex. 19 x 100mm x 1.95m T&G

A popular treated softwood T&G cladding with many uses: making gates, doors, sheds & other garden structures, cladding to cover old brickwork, premium fencing etc.
Produced from good quality redwood and pressure-treated (Green) for outdoor durability.

- PTGV Profile (Planed Tongue & Groove, with a 'V' joint)
- Machined from: 19 x 100mm
- Finished thickness: 14.5mm
- Board coverage when fitted: 85mm
- High-quality, slow-grown redwood
- Pressure Treated (green), 15-year performance warranty - view the Downloads tab below for details
- We recommend this profile be installed vertically
- 11.76 linear metres are needed to cover 1m²

Stock Availability: 1431 in stock

From £3.54 Inc. VAT

100 x 100mm x 2.4m Sawn Treated Post

General purpose, pressure treated, sawn finish timber. Mainly used as fence posts but could have many other uses.

- Dimensions: 100 x 100mm x 2.4m
- Sawn Finish
- Homegrown Softwood, locally produced in the UK
- Pressure Treated - Green

Stock Availability: 854 in stock

£15.19 Inc. VAT