36 x 150mm x 3.6m Treated

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

Roofing Bolt; designed for bolting through metal sheets but have many other uses.
14mm bolt head, with 2mm cross-slots to fit flat head screw driver blade.
Supplied with one square nut, hex nuts and washers sold separately.
BZP finish (Bright Zinc Plate).

Steel washer, for general use with bolts and threaded bar (studding).
BZP (Bright Zinc Plate) finish.

Dimensions: 1.5mm x 13.5mm Diameter
6.5mm Bolt Hole: To suit M6 thread

Pointed Pegs can be used for many purposes e.g. securing Gravel Boards and Sleepers, or as survey (marking out) pegs in the construction industry.

Pointed Pegs are a sawn finish and pressure treated green. Standard stock sizes are listed, bespoke sizes can be cut to order.