Search
Mon-Fri: 7am to 5pm | Sat: 8am to 12pm | Sun: Closed
Show Prices Inc. VAT
Product Catalogue
    Menu Close

    4.0 x 30mm Superdrive Woodscrews - Box 200

    High performance woodscrews, manufactured from high quality, low carbon steel & case hardened. The type 17 point, knurled thread and wax coating all help reduce the torque required for quick insertion.

    - Thread diameter: 4.0mm
    - Length: 30mm
    - Box of 200 screws
    - Free PZ2 driving bit included with every box
    Availability: 42 in stock
    £3.80 Inc. VAT
    i h

    High performance woodscrews, manufactured from high quality, low carbon steel & case hardened. Super Drive screws are intended for use in softwood, hardwood, MDF, chipboard, however they can also be used for fixing thin sheet metal & plastics.



    • Thread diameter: 4.0mm

    • Length: 30mm

    • Box of 200 screws

    • Free PZ2 driving bit included with every box


    Screw features:



    • Type 17 point: The long sharp point pierces the timber for quick start up, even in dense hardwoods. Designed for screwing into wood, the type 17 point decreases the chance of splitting the timber which reduces the need to drill a pilot hole.

    • Wax coating: Super Drive screws benefit from an anti-friction coating which increases drive speed & also helps against corrosion.

    • Knurled thread: Grooves in the thread cut through the wood fibres quickly and enable faster insertion.

    • Maximum pull out resistance: The 40° single thread has been designed to give maximum pull out resistance. Super Drive screws up to & including 70mm are fully threaded.

    • Ribbed double countersunk head: The ribs cut a countersunk hole while the screw is being inserted, eliminating the need for a separate drill bit.

    • Deep recessed pozi head: The PZ2 head is less likely to cam out than a phillips head.



    Products specifications
    MaterialHardened Steel
    FinishYellow Passivated
    Screw Head TypeCountersunk - Pozi 2 Drive
    Length30mm
    Diameter4mm
    *
    *
    *
    *
    Product tags
    Customers that ordered this item also bought:
    Picture of 1.65m Feather Edge Board

    1.65m Feather Edge Board

    125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
    Feather-edge can also be fitted horizontally as a budget cladding.

    - 125mm Board Width
    - 10 boards needed per linear metre (25mm overlap)
    - Cut from 22 x 125mm
    - Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
    - Homegrown Spruce
    - Sawn finish
    - Pressure treated green
    Stock Availability: 9058 in stock
    From £1.36 Inc. VAT
    Picture of 1.8m Feather Edge Board

    1.8m Feather Edge Board

    125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
    Feather-edge can also be fitted horizontally as a budget cladding.

    - 125mm Board Width
    - 10 boards needed per linear metre (25mm overlap)
    - Cut from 22 x 125mm
    - Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
    - Homegrown Spruce
    - Sawn finish
    - Pressure treated green
    Stock Availability: 11962 in stock
    From £1.49 Inc. VAT
    Picture of 1.5m Feather Edge Board

    1.5m Feather Edge Board

    125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
    Feather-edge can also be fitted horizontally as a budget cladding.

    - 125mm Board Width
    - 10 boards needed per linear metre (25mm overlap)
    - Cut from 22 x 125mm
    - Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
    - Homegrown Spruce
    - Sawn finish
    - Pressure treated green
    Stock Availability: 3175 in stock
    From £1.22 Inc. VAT
    Picture of 2.4m Feather Edge Board

    2.4m Feather Edge Board

    125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
    Feather-edge can also be fitted horizontally as a budget cladding.

    - 125mm Board Width
    - 10 boards needed per linear metre (25mm overlap)
    - Cut from 22 x 125mm
    - Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
    - Homegrown Spruce
    - Sawn finish
    - Pressure treated green
    Stock Availability: 2745 in stock
    From £2.00 Inc. VAT
    Picture of ex. 19 x 100mm x 3.9m T&G

    ex. 19 x 100mm x 3.9m T&G

    A popular treated softwood T&G cladding with many uses: making gates, doors, sheds & other garden structures, cladding to cover old brickwork, premium fencing etc.
    Produced from good quality redwood and pressure treated (Green) for outdoor durability.

    - PTGV Profile (Planed Tongue & Groove, with a 'V' joint)
    - Machined from: 19 x 100mm
    - Finished thickness: 14mm
    - Board coverage when fitted: 85mm
    - High quality, slow grown redwood
    - Pressure Treated (green), 15 year performance warranty - view the Downloads tab below for details
    - We recommend this profile is installed vertically
    - 11.76 linear metres are needed to cover 1m²
    Stock Availability: 866 in stock
    From £7.08 Inc. VAT
    Picture of 7.5 x 62mm Masonry Screw

    7.5 x 62mm Masonry Screw

    A self-tapping Masonry Screw for brick and concrete, a popular fixing to fit window frames. An easy to use fixing that does not require plastic plugs, it has a high resistance to fire compared to nylon fixings. This screw is a friction fixing which minimises expansion stress in the base material, this allows fixing near to the edge, and gives greater loading performance than most nylon fixings.
    To use: pre-drill a 6mm pilot hole, use a drill or impact driver fitted with T30 bit to drive the screw in.

    T30 bit and white cover caps included when bought in box quantities of 100.

    Drill Bit Dia. - 6mm
    Min. Embed Depth - 45mm
    Head Type - T30 Torx
    Driver Type - Drill / Impact Driver
    Stock Availability: 220 in stock
    From £0.13 Inc. VAT