Search
Mon-Fri: 8am to 5pm | Sat: 8am to 12pm | Sun: Closed
Show Prices Inc VAT
Product Catalogue
    Menu Close

    4.0 x 35mm SPAX WIROX F-CSK SCREWS

    Manufacturer: Spax
    High performance Torx-drive wood screws, made in Germany. The Wirox coating gives a high level of protection against corrosion and is more environmentally friendly than conventional finishes as it is free from chromium-VI. The 4CUT point eliminates the need to pre-drill and reduces splitting during insertion.

    - Box of 200 screws
    - Suitable for internal & external use
    - TX20 Torx screwdriver drive, bits sold separately
    Availability: 7 in stock
    £5.50 incl VAT
    i h

    Made in Germany, these performance torx drive wood screws are suitable for internal & external use.
    The Wirox coating gives a high level of protection against corrosion and is considerably more environmentally friendly than conventional surfaces as it is free from chromium-VI.

    The 4CUT point eliminates the need to pre-drill, with its point reducing the splitting effect & the square end pushing aside the fibre of the wood, reducing screwing-in torque.

    Screwdriver bits are sold separately, 4.0 & 5.0mm thread require a T20 bit, while 6.0mm thread requires T30.

    Products specifications
    Diameter (mm)4
    Length (mm)35 mm
    MaterialSteel
    FinishWirox Coating
    Screw Head TypeCountersunk - T20 Drive
    *
    *
    *
    *
    Product tags
    Customers that ordered this item also bought:
    Picture of 47mm EASY FIX PANEL CLIP

    47mm EASY FIX PANEL CLIP

    We stock a selection of different clips for fixing panels to posts. The U clips must be fitted to the post first & the panel slotted in after the U clips are secure. The easy fix clips can be fitted to the panel first and then secured to the post, eliminating the need to lift the panel up high and slot it in. If you are not sure which size clip you need, please contact us.
    £1.12 incl VAT
    Picture of 38 X 89mm X 2.4m C16 - UNTREATED CLS

    38 X 89mm X 2.4m C16 - UNTREATED CLS

    CLS (Canadian Lumber Standard), a general purpose, lower grade, untreated building timber. Typically used for internal first fix applications.

    - Machined from 47 x 100mm, finished size approx. 38 x 89mm
    - Smooth regularised finish
    - Grade C16
    - Untreated softwood
    £7.01 incl VAT
    Picture of COARSE RAPID SETTING POST-MIX 20KG

    COARSE RAPID SETTING POST-MIX 20KG

    Fast setting post hole concrete. Simply half fill the hole with water and pour the post mix in. Fencing contractors typically allow 1½ to 2 bags per fence post (dependant on diameter & depth of hole, plus post size). We offer 33% discount on post-mix when you pay & collect in store!
    £7.98 incl VAT
    Picture of POSTSAVER (SKU05) FOR 100 X 100mm POST / 75 X 125mm POST

    POSTSAVER (SKU05) FOR 100 X 100mm POST / 75 X 125mm POST

    Postsaver Pro-Sleeves are a guaranteed, proven solution to ensure long-life fence posts.

    The sleeve’s unique dual-layer, rot prevention technology excludes all the factors required for decay to occur at the ground-line. Unlike liquid coatings and bitumen paint, Postsaver Pro Sleeves maintain a barrier to the causes of decay even when the post cracks or splits.

    Pro-Sleeves are proven to prevent ground rot with over 26 years of volume use in 30+ countries worldwide. Backed up with 20 years of excellent independent test data, they are easily heat applied with a blowtorch in a matter of seconds, and sleeved posts can be installed in all the usual ways.

    Simply fit Postsaver Pro-Sleeves and relax, safe in the knowledge that your posts are protected from rot for 20 years.

    Postsaver: Do it Once, Do It Right
    £2.02 incl VAT
    Picture of HEAVY DUTY ANGLE BRACKET - E2/2.5/7090

    HEAVY DUTY ANGLE BRACKET - E2/2.5/7090

    Reinforced angle bracket with multiple applications.

    Measurements:
    A: 90mm
    B: 90mm
    C: 65mm
    t: 2.5mm
    £2.02 incl VAT