4.0 x 40mm Superdrive Woodscrews - Box 200

A popular treated softwood T&G cladding with many uses: making gates, doors, sheds & other garden structures, cladding to cover old brickwork, premium fencing etc.
Produced from good quality redwood and pressure-treated (Green) for outdoor durability.

- PTGV Profile (Planed Tongue & Groove, with a 'V' joint)
- Machined from: 19 x 100mm
- Finished thickness: 14.5mm
- Board coverage when fitted: 85mm
- High-quality, slow-grown redwood
- Pressure Treated (green), 15-year performance warranty - view the Downloads tab below for details
- This cladding product is CladMark accredited.
- We recommend this profile be installed vertically
- 11.76 linear metres are needed to cover 1m²

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

Premium quality planed finish Picket Slats. Machined from 22 x 75mm joinery grade Scandinavian redwood, pressure treated green with a 15 year guarantee. Picket Slats are sold individually; build the fence to your own specification.

- Dimensions: 20 x 70 x 900mm (finished sizes)
- Round Top
- Planed all round
- Premium Quality Scandinavian Redwood
- Pressure treated with 15 Year Guarantee - details in downloads tab below

If you would like help to calculate the materials you need, please give us a call 0117 9674382.

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

Rapid setting post hole concrete, suitable for fixing all types of wooden, metal and concrete posts.

Post Mix is a pre-blended, quick setting concrete mix, which sets in approximately 10 minutes after mixing with water (depending on ambient temperature).
Simply half fill the hole with water, then pour the post mix in.

Fencing contractors typically allow 1½ to 2 bags per fence post (this varies depending on the hole and post size).

We offer 33% discount on post-mix when you pay & collect in store!

A self-tapping Masonry Screw for brick and concrete, a popular fixing to fit window frames. An easy to use fixing that does not require plastic plugs, it has a high resistance to fire compared to nylon fixings. This screw is a friction fixing which minimises expansion stress in the base material, this allows fixing near to the edge, and gives greater loading performance than most nylon fixings.
To use: pre-drill a 6mm pilot hole, use a drill or impact driver fitted with T30 bit to drive the screw in.

T30 bit and white cover caps included when bought in box quantities of 100.

Drill Bit Dia. - 6mm
Min. Embed Depth - 45mm
Head Type - T30 Torx
Driver Type - Drill / Impact Driver