4.5 x 60mm Spax Wirox Decking Screws - Tub 250

General purpose, pressure treated, sawn timber boards with many uses. Perfect for path and garden border edging, fencing gravel boards, heavy duty 'hit and miss' fencing slats and Yorkshire board cladding.

- Dimensions: 22 x 150mm x 2.4m
- Sawn Finish
- Homegrown Softwood, locally produced in the UK
- Pressure Treated - Green

Galvanised Truss Clip for constructing timber to timber framework. Precision formed and engineered for fast installation and maximum loads.

- Suitable for securing 47mm wide timber
- Overall Width - 105mm (including fixing wings)
- Length - 100mm

Install using 3.75 x 30mm square twist nails
6 nail holes / truss clip
1 kg square twist nails installs approx. 58 truss clips

Pre-cut noggin to suit 300mm joist centres; the joist centre requirement for composite decking. Building noggins into framework will significantly increase strength and rigidity. Pre-cut noggins make building framework quicker, easier and more accurate than cutting noggins on site. No need to re-treat cut ends as they are fully pressure treated.

- Machined from 47 x 100mm, finished size approx. 45 x 95mm
- Smooth regularised finish
- Good quality, slow grown softwood
- Pressure treated green

If you aren't sure how many noggins you need for your timber framework, please get in touch for advice.

- 41mm x 41mm square spindles.
- Pressure treated for durability.
- Based on a gap of 99mm in between spindles, 7.14 spindles cover 1 metre.

Premium Quality Softwood Decking

- Profile machined from 38 x 125mm timber, finished size approx. 33 x 120mm
- Dual sided groove pattern
- Machined from 5th grade Redwood, quality slow-grown material
- Pressure treated green, 15 year Treated-Right Warranty, details in Downloads tab below
- This decking product is DeckMark accredited
- Maximum joist centres - 600mm
- We have stocked this decking profile since 2002 due to popularity

Hex head coach screw, for heavy-duty applications. Suitable for fixing into timber, can fix into brickwork and masonry with an M10 plug. M10 washers sold separately.

- Length excludes 7mm bolt head
- 95mm screw thread, 35mm unthreaded
- Bright Zinc Plated finish (BZP)
- Pre-drill timber with 6 - 8mm pilot hole
- Hex Head fits a 17mm Spanner