Search
Mon-Fri: 8am to 5pm | Sat: 8am to 12pm | Sun: Closed
Show Prices Exc. VAT
Product Catalogue
    Menu Close

    47mm x 100mm x 255mm Noggin (300mm Centres)

    Pre-cut noggin to suit 300mm joist centres; the joist centre requirement for composite decking. Building noggins into framework will significantly increase strength and rigidity. Pre-cut noggins make building framework quicker, easier and more accurate than cutting noggins on site. No need to re-treat cut ends as they are fully pressure treated.

    - Machined from 47 x 100mm, finished size approx. 45 x 95mm
    - Smooth regularised finish
    - Good quality, slow grown softwood
    - Pressure treated green

    If you aren't sure how many noggins you need for your timber framework, please get in touch for advice.
    Availability: 92 in stock
    £0.68 Exc. VAT
    i h

    Timber Noggin 47 x 100mm x 255mm (300mm Centres)


    Incorporating our pre-cut noggin into your timber decking framework is an effective way to substantially improve its strength and stability. Our pre-cut noggins are specifically designed to fit the 450mm spacing that is commonly used for joist centres in decking frameworks.


    Save significant time and effort with our pre-cut noggin, which allows for faster, easier, and more precise construction of your decking framework compared to cutting noggins on site. Additionally, our pressure-treated noggins do not require re-treatment of cut ends like on-site cut noggins, ensuring maximum effectiveness without significant additional effort.


    Noggin Specs:

    Type - Smooth regularised finish
    Texture: Regularised/Smooth finish
    Treatment: Pressure Treated Green


    If you require advice on determining the number of noggins you need for your timber framework, please do not hesitate to contact us.


    For more information about our deliveries, please see here!

    Products specifications
    FinishRegularised
    TreatmentPressure Treated
    Width100mm
    Length255mm
    Thickness47mm
    *
    *
    *
    *
    Customers that ordered this item also bought:
    Picture of 47 x 100mm x 3.6m C24 - Treated

    47 x 100mm x 3.6m C24 - Treated

    Timber carcassing, general purpose building timber.

    - Machined from 47 x 100mm, finished size approx. 45 x 95mm
    - Smooth regularised finish
    - Grade C24
    - Good quality, slow grown softwood
    - Pressure treated green
    Stock Availability: 663 in stock
    £8.31 Exc. VAT
    Picture of 47mm Truss Clip

    47mm Truss Clip

    Galvanised Truss Clip for constructing timber to timber framework. Precision formed and engineered for fast installation and maximum loads.

    - Suitable for securing 47mm wide timber
    - Overall Width - 105mm (including fixing wings)
    - Length - 100mm

    Install using 3.75 x 30mm square twist nails
    6 nail holes / truss clip
    1 kg square twist nails installs approx. 58 truss clips
    Stock Availability: 183 in stock
    £0.44 Exc. VAT
    Picture of Composite Prime HD Deck® XS - Lava

    Composite Prime HD Deck® XS - Lava

    Composite Prime HD Deck® XS, premium quality composite decking. HD Deck® XS is a dual-sided board offering the choice of two groove patterns. Give your garden a smart, contemporary look with HD Deck® XS decking. Suitable for domestic and commercial use.

    Key Information:
    - Range: Composite Prime, HD Deck® XS
    - Colour: Lava
    - Board dimensions: 25 x 146mm x 3.6m
    - Dual sided board with two groove patterns
    - Sustainable, produced from recycled materials
    - Slip resistant
    - Durable
    - Safe to pressure wash
    - Barefoot safe

    Check out our Downloads tab below for additional information
    Stock Availability: 232 in stock
    £27.58 Exc. VAT
    Picture of 47 x 100mm x 2.4m C24 - Treated

    47 x 100mm x 2.4m C24 - Treated

    Timber carcassing, general purpose building timber.

    - Machined from 47 x 100mm, finished size approx. 45 x 95mm
    - Smooth regularised finish
    - Grade C24
    - Good quality, slow grown softwood
    - Pressure treated green
    Stock Availability: 1215 in stock
    £5.54 Exc. VAT
    Picture of 75 x 225mm x 2.4m Treated Softwood Sleeper

    75 x 225mm x 2.4m Treated Softwood Sleeper

    Softwood sleeper, pressure treated green, sawn finish, non-structural timber. Mainly used for landscaping projects; for raised beds and retaining walls but could have many other uses.

    - Dimensions: 75 x 225mm x 2.4m
    - Sawn Finish
    - Homegrown Softwood, locally produced in the UK
    - Pressure Treated - Green
    Stock Availability: 62 in stock
    £20.61 Exc. VAT
    Picture of Composite Prime HD Deck® XS End Cap - Lava

    Composite Prime HD Deck® XS End Cap - Lava

    Add the finishing touches to composite decking with Composite Prime HD Deck® XS End Caps - Lava

    - Part of the Composite Prime HD® XS Lava range
    - This cap is designed to securely fit into exposed board ends of Composite Prime HD Deck® XS Lava decking
    Stock Availability: 214 in stock
    £0.98 Exc. VAT