Search
Mon-Fri: 8am to 5pm | Sat: 8am to 12pm | Sun: Closed
Show Prices Exc. VAT
Product Catalogue
    Menu Close

    47mm Truss Clip

    Manufacturer: Simpson Strong-Tie
    Galvanised Truss Clip for constructing timber to timber framework. Precision formed and engineered for fast installation and maximum loads.

    - Suitable for securing 47mm wide timber
    - Overall Width - 105mm (including fixing wings)
    - Length - 100mm

    Install using 3.75 x 30mm square twist nails
    6 nail holes / truss clip
    1 kg square twist nails installs approx. 58 truss clips
    Manufacturer part number: TCP47
    Availability: 183 in stock
    £0.44 Exc. VAT
    i h

    Galvanised Truss Clip for constructing timber to timber framework. Precision formed and engineered for fast installation and maximum loads.


    - Suitable for securing 47mm wide timber
    - Overall Width - 105mm (including fixing wings)
    - Length - 100mm


    Galvanised truss clips. Used to attach trusses, rafters & girders to wall plates to provide wind restraint. Fix in place using 3.75 x 30mm square twist nails.
    These truss clips benefit from a speed prong which holds the clip in position for easier attachment - the installer doesn't have to try to hold anchor, timber and nail in one hand and swing a hammer with the other!

    Products specifications
    Timber Thickness (mm)47
    FinishGalv
    *
    *
    *
    *
    Product tags
    Customers that ordered this item also bought:
    Picture of 47 x 100mm x 4.8m C24 - Treated

    47 x 100mm x 4.8m C24 - Treated

    Timber carcassing, general purpose building timber.

    - Machined from 47 x 100mm, finished size approx. 45 x 95mm
    - Smooth regularised finish
    - Grade C24
    - Good quality, slow grown softwood
    - Pressure treated green
    Stock Availability: 469 in stock
    £11.08 Exc. VAT
    Picture of 3.0m Feather Edge Board

    3.0m Feather Edge Board

    125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
    Feather-edge can also be fitted horizontally as a budget cladding.

    - 125mm Board Width
    - 10 boards needed per linear metre (25mm overlap)
    - Cut from 22 x 125mm
    - Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
    - Homegrown Spruce
    - Sawn finish
    - Pressure treated green
    Stock Availability: 1188 in stock
    From £1.98 Exc. VAT
    Picture of 47mm x 100mm x 255mm Noggin (300mm Centres)

    47mm x 100mm x 255mm Noggin (300mm Centres)

    Pre-cut noggin to suit 300mm joist centres; the joist centre requirement for composite decking. Building noggins into framework will significantly increase strength and rigidity. Pre-cut noggins make building framework quicker, easier and more accurate than cutting noggins on site. No need to re-treat cut ends as they are fully pressure treated.

    - Machined from 47 x 100mm, finished size approx. 45 x 95mm
    - Smooth regularised finish
    - Good quality, slow grown softwood
    - Pressure treated green

    If you aren't sure how many noggins you need for your timber framework, please get in touch for advice.
    Stock Availability: 92 in stock
    £0.68 Exc. VAT
    Picture of 11mm OSB3 Sheet

    11mm OSB3 Sheet

    11mm x 1219mm x 2440mm OSB3 Sheet

    OSB (Oriented Strand Board) is a general purpose timber composite sheet material. Popular for use in roofing, flooring, wall sheathing, hoardings etc.

    OSB3 is a structural board, suitable for internal use and protected external use. For external use it must have a protective cladding, a suitable paint finish or external grade felt covering.
    Stock Availability: 135 in stock
    £13.33 Exc. VAT
    Picture of 47 x 100mm x 2.4m C24 - Treated

    47 x 100mm x 2.4m C24 - Treated

    Timber carcassing, general purpose building timber.

    - Machined from 47 x 100mm, finished size approx. 45 x 95mm
    - Smooth regularised finish
    - Grade C24
    - Good quality, slow grown softwood
    - Pressure treated green
    Stock Availability: 1570 in stock
    £5.54 Exc. VAT
    Picture of 47 x 150mm x 4.2m C24 - Treated

    47 x 150mm x 4.2m C24 - Treated

    Timber carcassing, general purpose building timber.

    - Machined from 47 x 150mm, finished size approx. 45 x 145mm
    - Smooth regularised finish
    - Grade C24
    - Good quality, slow grown softwood
    - Pressure treated green
    Stock Availability: 175 in stock
    £14.50 Exc. VAT