5.0 x 100mm Superdrive Woodscrews - Box 100

A popular treated softwood T&G cladding with many uses: making gates, doors, sheds & other garden structures, cladding to cover old brickwork, premium fencing etc.
Produced from good quality redwood and pressure-treated (Green) for outdoor durability.

- PTGV Profile (Planed Tongue & Groove, with a 'V' joint)
- Machined from: 19 x 100mm
- Finished thickness: 14.5mm
- Board coverage when fitted: 85mm
- High-quality, slow-grown redwood
- Pressure Treated (green), 15-year performance warranty - view the Downloads tab below for details
- This cladding product is CladMark accredited.
- We recommend this profile be installed vertically
- 11.76 linear metres are needed to cover 1m²

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

Rapid setting post hole concrete, suitable for fixing all types of wooden, metal and concrete posts.

Post Mix is a pre-blended, quick setting concrete mix, which sets in approximately 10 minutes after mixing with water (depending on ambient temperature).
Simply half fill the hole with water, then pour the post mix in.

Fencing contractors typically allow 1½ to 2 bags per fence post (this varies depending on the hole and post size).

We offer 33% discount on post-mix when you pay & collect in store!

Premium treated timber carcassing for general purpose building projects.
- Machined from 47 x 75mm, finished size approx. 45 x 70mm
- Smooth regularised finish
- Grade C16 / C24 - mixed
- Good quality, slow grown softwood
- Pressure treated green

Galvanised joist hanger for constructing timber to timber framework. Precision formed and engineered for fast installation and maximum loads.

- Suitable for 47mm wide timber
- Width: 146.4mm (including fixing wings)
- Length: 236.5mm
- Depth: 52.1mm

Carriage Bolt; cup square hex, 30mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.

Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.

Supplied with one standard hex nut, washers sold separately.