50mm Corner Brace

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

Timber carcassing, general purpose building timber.

- Machined from 47 x 50mm, finished size approx. 45 x 45mm
- Smooth regularised finish
- Good quality, slow grown softwood
- Pressure treated green

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

Premium Quality Softwood Decking

- Profile machined from 32 x 125mm timber, finished size approx. 28 x 120mm
- Dual sided pattern - smooth / grooved
- Machined from 5th grade Redwood, quality slow-grown material
- Pressure treated green, 15 year Treated-Right Warranty, details in Downloads tab below
- Maximum joist centres - 450mm
- We have stocked this decking profile since 2010 due to popularity

Fine sawn finish timber post cap for 100 x100mm posts, pressure treated green. Protects post ends from weather and provides a smart finishing touch.

- Dimensions: 26mm x 119mm x 119mm
- Chamfered four sides
- Pressure treated

A self-tapping Masonry Screw for brick and concrete, a popular fixing to fit window frames. An easy to use fixing that does not require plastic plugs, it has a high resistance to fire compared to nylon fixings. This screw is a friction fixing which minimises expansion stress in the base material, this allows fixing near to the edge, and gives greater loading performance than most nylon fixings.
To use: pre-drill a 6mm pilot hole, use a drill or impact driver fitted with T30 bit to drive the screw in.

T30 bit and white cover caps included when bought in box quantities of 100.

Drill Bit Dia. - 6mm
Min. Embed Depth - 45mm
Head Type - T30 Torx
Driver Type - Drill / Impact Driver