50mm Decking Screws - Box 200

50mm Fence Panel Clips; used to attach fence panels to wooden posts. Minimum of 4 clips needed per fence panel.

- Fits fence panels up to 50mm thick
- Galvanised Steel

Composite Prime HD Deck® XS, premium quality composite decking. HD Deck® XS is a dual-sided board offering the choice of two groove patterns. Give your garden a smart, contemporary look with HD Deck® XS decking. Suitable for domestic and commercial use.

Key Information:
- Range: Composite Prime, HD Deck® XS
- Colour: Lava
- Board dimensions: 25 x 146mm x 3.6m
- Dual sided board with two groove patterns
- Sustainable, produced from recycled materials
- Slip resistant
- Durable
- Safe to pressure wash
- Barefoot safe

Check out our Downloads tab below for additional information

Galvanised mini joist hanger for constructing timber to timber framework. Precision formed and engineered for fast installation and maximum loads.

- Suitable for hanging 47mm wide timber
- Width - 115mm (including fixing wings)
- Length - 62mm
- Depth - 48mm

Install using 3.75 x 30mm square twist nails:
16 nail holes / hanger
1 kg square twist nails installs 21 hangers

Hex head coach screw, for heavy-duty applications. Suitable for fixing into timber, can fix into brickwork and masonry with an M10 plug. M10 washers sold separately.

- Length excludes 7mm bolt head
- 85mm screw thread, 15mm unthreaded
- Bright Zinc Plated finish (BZP)
- Pre-drill timber with 6 - 8mm pilot hole
- Hex Head fits a 17mm Spanner

A self tapping bolt suitable for concrete, stone, brick, marble, wood and block (solid or hollow). Safe anchorage achieved without the need of high tightening forces. Can be removed and re-fixed into the same hole, providing the thread is correctly aligned. No expansion forces enables close to the edge fixing.

Drill Bit Dia. - 10mm
Anchor Length - 130mm
Washer Size - 12mm (M12)
Min Hole Depth - 70mm
Min Over Drill Depth - 20mm
Min. Embed Depth - 50mm
Max. Fixture Thickness - 80mm
Drill Bit Dia. for clearance - 12mm (to prevent binding when tightening bolt)
Head Type - Hex Head, 17mm (Across Flats)
Driver Type - Impact driver, socket, spanner
Max Tightening Torque - 60Nm

A heavy steel washer, for general use with bolts and threaded bar (studding).
BZP (Bright Zinc Plate) finish.

Dimensions: 2mm x 28mm Diameter
13mm Bolt Hole: To suit M12 thread