Products tagged with '6X6'

General purpose, pressure treated, sawn finish timber. Mainly used as fence or gate posts but could have many other uses.

- 150 x 150mm x 2.1m Timber Post
- Homegrown softwood
- Sawn finish
- Pressure treated green
- 4 way weathered top (like a pyramid)
- Specified length includes the weathered top

General purpose, pressure treated, sawn finish timber. Mainly used as fence or gate posts but could have many other uses.

- 150 x 150mm x 2.4m Timber Post
- Homegrown softwood
- Sawn finish
- Pressure treated green
- 4 way weathered top (like a pyramid)
- Specified length includes the weathered top

General purpose, pressure treated, sawn finish timber. Mainly used as fence or gate posts but could have many other uses.

- 150 x 150mm x 3.0m Timber Post
- Homegrown softwood
- Sawn finish
- Pressure treated green
- Square ends, not weathered

General purpose, pressure treated, sawn finish timber. Mainly used as fence or gate posts but could have many other uses.

- 150 x 150mm x 3.6m Timber Post
- Homegrown softwood
- Sawn finish
- Pressure treated green
- Square ends, not weathered

Square Trellis Panels are sturdy and built to last; made from sawn finish 19 x 38mm batten; nailed construction. Pressure treated Green.

- Width: 1829mm ( 6’ )
- Height: 1829mm ( 6’ )
- Hole Size: 110 x 110mm (approx.)
- 19 x 38mm Sawn Batten
- Nailed Construction
- Pressure Treated Green

A heavy-duty Close Board Panel which is built to last. A sturdy option suitable for exposed, windy areas. Previously known as the Suffolk panel.

Height: 1829mm (6')
Width: 1829mm (6')

- Fully pressure treated fence panels,
- ex. 22 x 125mm Feather Edge slats with fine-sawn finish,
- Sturdy jointed framework on the back of the panel,
- Nailed construction; stainless steel fixings,
- Finished and protected with a top capping strip,

Our 125mm feather Edge Boarding will match these panels and can be purchased separately to make your own non-standard panel sizes if needed.

A premium quality Overlap Panel which is built to last.

Height: 1829mm (6')
Width: 1829mm (6')

- Fully pressure treated panels
- Nailed construction
- Straight-edge, horizontal, sawn-finish slats
- Five vertical battens on both sides (approx. 18 x 38mm)
- Framed top and bottom on both sides (approx. 18 x 38mm)
- Finished and protected with a top capping strip
- These panels look the same from both sides, perfect for shared boundaries
- Manufactured in the U.K.

A sturdy yet affordable Overlap Panel which is built to last.

- 6' wide x 6' high (1829mm wide x 1829mm high)
- Fully pressure treated panels
- Nailed construction
- Waney-edge, horizontal, sawn-finish slats
- Five vertical battens one side and three vertical battens on the other side (approx. 16 x 38mm)
- Framed top and bottom on one side (approx. 18 x 50mm)
- Finished and protected with a top capping strip
- Manufactured in the U.K.