Search
Mon-Fri: 8am to 5pm | Sat: 8am to 12pm | Sun: Closed
Show Prices Inc. VAT
Product Catalogue
    Menu Close

    75mm Concrete Repair Spur

    Concrete repair spurs are used when a wooden fence post has snapped or rotted off at ground level. If the fencing above ground level is still servicable; extend the life of the fence by fitting a repair spur. Tips on how to fit a Repair Spur in 'Full Description' tab (below).

    - Dimensions: 75 x 75 x 990mm
    - Two bolt holes for M10 Carriage Bolts or M10 Coach Screws
    - 14kg
    Availability: 78 in stock
    £13.37 Inc. VAT
    i h

    Concrete repair spurs are used when a wooden fence post has snapped or rotted off at ground level. If the fencing above ground is still servicable, extend the life of the fence by fitting a repair spur.


    - Dimensions: 75 x 75 x 990mm
    - Two bolt holes for M10 Carriage Bolts or M10 Coach Screws
    - 14kg


    Fitting Tips:



    1. Don't dismantle the fence, prop it in position while work is in progress.

    2. Cut the damaged wooden post off just above ground level, treat the cut end with Cut End Preserver.

    3. If possible dig a new post hole beside the existing post concrete, you may need to dig out the old post and concrete.

    4. Use M10 Carriage Bolts or M10 Coach Screws to attach the repair spur to the existing post.

    5. Ensure the post is level then set the repair spur in the ground with Post Mix.

    Products specifications
    MaterialConcrete
    Width75mm
    Length990mm
    Thickness75mm
    *
    *
    *
    *
    Customers that ordered this item also bought:
    Picture of 1.8m Feather Edge Board

    1.8m Feather Edge Board

    125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
    Feather-edge can also be fitted horizontally as a budget cladding.

    - 125mm Board Width
    - 10 boards needed per linear metre (25mm overlap)
    - Cut from 22 x 125mm
    - Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
    - Homegrown Spruce
    - Sawn finish
    - Pressure treated green
    Stock Availability: 13181 in stock
    From £1.49 Inc. VAT
    Picture of ex. 38 x 125mm x 3.9m Softwood Decking

    ex. 38 x 125mm x 3.9m Softwood Decking

    - Precision-machined profile from 38 x 125mm timber, finishing at approximately 33 x 120mm.
    - Forged from high-quality Redwood, guaranteeing strength and longevity.
    - Pressure treated for added durability, supported by a 15-year warranty.
    - Accredited by DeckMark for reliable quality standards.
    - Maximum joist spacing of 600mm, for effortless installation.
    Stock Availability: 194 in stock
    From £14.36 Inc. VAT
    Picture of Coarse Rapid Setting Post-Mix 20kg

    Coarse Rapid Setting Post-Mix 20kg

    Rapid setting post hole concrete, suitable for fixing all types of wooden, metal and concrete posts.

    Post Mix is a pre-blended, quick setting concrete mix, which sets in approximately 10 minutes after mixing with water (depending on ambient temperature).
    Simply half fill the hole with water, then pour the post mix in.

    Fencing contractors typically allow 1½ to 2 bags per fence post (this varies depending on the hole and post size).

    We offer 33% discount on post-mix when you pay & collect in store!
    Stock Availability: 5708 in stock
    £8.22 Inc. VAT
    Picture of M10 Form C Washer

    M10 Form C Washer

    Steel washer, for general use with bolts and threaded bar (studding).
    BZP (Bright Zinc Plate) finish.

    Dimensions: 2mm x 24mm Diameter
    11mm Bolt Hole: To suit M10 thread
    Stock Availability: 445 in stock
    From £0.11 Inc. VAT
    Picture of 47 x 100mm x 2.4m C24 - Treated

    47 x 100mm x 2.4m C24 - Treated

    Treated timber carcassing for general building projects.
    - Machined from 47 x 100mm, finished size approx. 45 x 95mm
    - Smooth regularised finish
    - Grade C24
    - Good quality, slow grown softwood
    - Pressure treated green
    Stock Availability: 1960 in stock
    £6.65 Inc. VAT
    Picture of 100 x 200mm x 1.2m Treated Softwood Sleeper

    100 x 200mm x 1.2m Treated Softwood Sleeper

    Softwood sleeper, pressure treated green, sawn finish, non-structural timber. Mainly used for landscaping projects; for raised beds and retaining walls but could have many other uses.

    - Dimensions: 100 x 200mm x 1.2m
    - Sawn Finish
    - Homegrown Softwood, locally produced in the UK
    - Pressure Treated - Green
    Stock Availability: 167 in stock
    £14.12 Inc. VAT