750mm Adjustable Hook & Band Hinge - Galvanised

Carriage Bolt; cup square hex, 30mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.

Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.

Supplied with one standard hex nut, washers sold separately.

A heavy steel washer, for general use with bolts and threaded bar (studding).
BZP (Bright Zinc Plate) finish.

Dimensions: 2mm x 28mm Diameter
13mm Bolt Hole: To suit M12 thread

The use of drop bolts is recommended on most gate installations as it helps to prevent the gate from twisting at the bottom.
The bolt can also be used to hold the gate open if required.

Heavy duty hinges ideal for use on high-use/heavy gates and external doors, these robust hinges provide adjustability, allowing the installer to easily align gates during fitting and also give adjustment after fitting to compensate for gate drop over time.
Available from stock galvanised and to order in epoxy black finish.

Fixings sold separately.

High performance Torx-drive wood screws, made in Germany. The Wirox coating gives a high level of protection against corrosion and is more environmentally friendly than conventional finishes as it is free from chromium-VI. The 4CUT point eliminates the need to pre-drill and reduces splitting during insertion.

- Box of 200 screws
- Suitable for internal & external use
- TX20 Torx screwdriver drive, bits sold separately

Padlockable sliding gate bolt.
All fixings included.