Products tagged with '75mm'

CLS (Canadian Lumber Standard), a general purpose, non-structural grade, untreated building timber. Typically used for internal first fix applications, E.g. non-structural framing & stud walls.

- Machined from 50 x 75mm, finished size approx. 38 x 63mm
- Smooth regularised finish
- Grade C16
- Untreated softwood

34° collated ring shank nails with an electro galvanised finish. One gas canister is included per 1100 nails, eliminating the need for spare gas. Compatible with most gas powered first fix nails guns, including the Paslode IM350, Paslode PPN35Ci & Hitachi NR90GC.

34° collated ring shank nails with an electro galvanised finish. One gas canister is included per 1100 nails, eliminating the need for spare gas. Compatible with most gas powered first fix nails guns, including the Paslode IM350, Paslode PPN35Ci & Hitachi NR90GC.

A post support fitting for installing timber posts and timber framework. The timber sits on the Post Support out of ground contact, which prevents rotting due to moisture from the ground. The height/level of the square support plate can easily be adjusted which is useful when building structures on uneven ground. Suitable for structurally supported timber posts and framework that need to last a long time e.g. for a basic timber porch or decking framework. Not recommended for free standing posts e.g. fence posts.

Installation: drill a 22mm diameter hole in the end of the timber post for the threaded bar to fit into, the depth of hole will vary depending on how much elevation is required. The post should sit firmly over the threaded bar down to the square support plate. The two nuts are tightened against each other to lock the support plate in the required position. The bottom of the post support is designed to be bolted down to a concrete base, we recommend using M10 Thunder Bolts.

- Welded construction, galvanised steel
- Total Height - 255mm
- Threaded bar - 22mm diameter
- Square support plate - 80 x 80mm x 4.5mm
- Bolt Down Plate - 80 x 80mm x 4.5mm
- 11mm fixing holes (x8)

These Faithfull Utility Paint Brushes are made 100% synthetic filaments and are suitable for use with all types of paint.

The brushes feature a rust-resistant ferrule and a contoured handle for greater user comfort.