75mm x 75mm Galvanised Repair Spur

30mm Fence Panel L-Clip, a useful panel clip for discreet fixing that can only be seen from one side. Can also be used to fix gravel boards, as well as many uses as a general purpose corner bracket.

- Angle: 30 x 30mm
- Height: 50mm
- Galvanised Steel

General purpose, pressure treated, sawn finish timber. Mainly used for agricultural post & rail fencing (also known as motorway fencing) and feather-edge fencing.

- Dimensions: 38 x 88mm x 3.0m
- Sawn Finish
- Homegrown Softwood, locally produced in the UK
- Pressure Treated - Green

General purpose, pressure treated, sawn finish timber. Mainly used as fence posts but could have many other uses.

- Dimensions: 75 x 75mm x 2.1m
- Sawn Finish
- Homegrown Softwood, locally produced in the UK
- Pressure Treated - Green

A heavy-duty Close Board Panel which is built to last. A sturdy option suitable for exposed, windy areas. Previously known as the Suffolk panel.

Height: 1829mm (6')
Width: 1829mm (6')

- Fully pressure treated fence panels,
- ex. 22 x 125mm Feather Edge slats with fine-sawn finish,
- Sturdy jointed framework on the back of the panel,
- Nailed construction; stainless steel fixings,
- Finished and protected with a top capping strip,

Our 125mm feather Edge Boarding will match these panels and can be purchased separately to make your own non-standard panel sizes if needed.

A heavy-duty Close Board Panel which is built to last. A sturdy option suitable for exposed, windy areas. Previously known as the Suffolk panel.

Height: 1219mm (4')
Width: 1829mm (6')

- Fully pressure treated fence panels,
- ex. 22 x 125mm Feather Edge slats with fine-sawn finish,
- Sturdy jointed framework on the back of the panel,
- Nailed construction; stainless steel fixings,
- Finished and protected with a top capping strip,

Our 125mm feather Edge Boarding will match these panels and can be purchased separately to make your own non-standard panel sizes if needed.

High performance Torx-drive wood screws, made in Germany. The Wirox coating gives a high level of protection against corrosion and is more environmentally friendly than conventional finishes as it is free from chromium-VI. The 4CUT point eliminates the need to pre-drill and reduces splitting during insertion.

- Box of 200 screws
- Suitable for internal & external use
- TX20 Torx screwdriver drive, bits sold separately