Search
Mon-Fri: 8am to 5pm | Sat: 8am to 12pm | Sun: Closed
Show Prices Exc. VAT
Product Catalogue
    Menu Close

    900 x 1800mm Wellow Gate

    The Wellow Gate is a high quality curved top, treated softwood pedestrian gate that will look at home in any setting. It has a mortice and tenoned, frame ledged and braced frame with sturdy T&G cladding.

    - Width: 900mm (approx. 3’)
    - Height: 1800mm at highest point (approx. 6’)
    - Gate thickness: 45mm
    - T&G Cladding (ex. 19 x 100mm)
    - Can be hung for left or right-hand opening
    Availability: Out of stock
    £201.85 Exc. VAT
    i h

    The Wellow Gate is a high quality curved top, treated softwood pedestrian gate that will look at home in any setting. It has a mortice and tenoned, frame ledged and braced frame with sturdy T&G cladding.


    - Width: 900mm (approx. 3’)
    - Height: 1800mm at highest point (approx. 6’)
    - Gate thickness: 45mm
    - T&G Cladding (ex. 19 x 100mm)
    - Can be hung for left or right-hand opening

    Products specifications
    Gate CladdingT&G
    Width900mm
    Height1800mm
    *
    *
    *
    *
    Customers that ordered this item also bought:
    Picture of M8 x 75mm Thunder Bolt

    M8 x 75mm Thunder Bolt

    A self tapping bolt suitable for concrete, stone, brick, marble, wood and block (solid or hollow). Safe anchorage achieved without the need of high tightening forces. Can be removed and re-fixed into the same hole, providing the thread is correctly aligned. No expansion forces enables close to the edge fixing.

    Drill Bit Dia. - 8mm
    Anchor Length - 75mm
    Washer Size - 10mm (M10)
    Min Hole Depth - 55mm
    Min Over Drill Depth - 15mm
    Min. Embed Depth - 40mm
    Max. Fixture Thickness - 35mm
    Drill Bit Dia. for clearance - 10mm (to prevent binding when tightening bolt)
    Head Type - Hex Head, 15mm (Across Flats)
    Driver Type - Impact driver, socket, spanner
    Max Tightening Torque - 40Nm
    Stock Availability: 179 in stock
    From £0.68 Exc. VAT
    Picture of 50mm Fence Panel U-Clip

    50mm Fence Panel U-Clip

    50mm Fence Panel Clips; used to attach fence panels to wooden posts. Minimum of 4 clips needed per fence panel.

    - Fits fence panels up to 50mm thick
    - Galvanised Steel
    Stock Availability: 134 in stock
    £0.55 Exc. VAT
    Picture of 150mm x 1.83m Concrete Gravel Board

    150mm x 1.83m Concrete Gravel Board

    Concrete gravel boards slot between concrete posts to give fence panels a level surface to sit on. It is beneficial to use gravel boards if the ground is sloping; the gravel board is dug into the ground to create a level surface instead of digging in the fence panel. Raising the panel on a gravel board will help prevent rot caused by ground moisture, gravel boards also help to prevent damage to fence panels caused by lawn mowers and strimmers.

    - Dimensions: 45mm x 150mm x 1829mm
    - 20kg Each
    - C50 Concrete (a strong mix)
    - Two 5.5mm rebar set inside.
    Stock Availability: 536 in stock
    £14.95 Exc. VAT
    Picture of Standard Close Board Panel 1676mm (5'6")

    Standard Close Board Panel 1676mm (5'6")

    A heavy duty Close Board fence panel. Made in the U.K. using pressure treated, home grown softwoood.

    Height: 1676mm (5'6")
    Width: 1829mm (6’)

    - 47 x 30mm framework
    - ex. 22 x 125mm feather edge
    - Nailed construction
    - Pressure Treated green
    - Finished with planed capping
    Stock Availability: 74 in stock
    £46.36 Exc. VAT
    Picture of 47 x 125mm x 3.6m C24 - Treated

    47 x 125mm x 3.6m C24 - Treated

    Choose our treated carcassing timber for your DIY projects!
    - Machined from 47 x 125mm, finished size approx. 45 x 120mm
    - Smooth regularised finish
    - Grade C24
    - Good quality, slow grown softwood
    - Pressure treated green
    Stock Availability: 513 in stock
    £10.35 Exc. VAT
    Picture of Coarse Rapid Setting Post-Mix 20kg

    Coarse Rapid Setting Post-Mix 20kg

    Rapid setting post hole concrete, suitable for fixing all types of wooden, metal and concrete posts.

    Post Mix is a pre-blended, quick setting concrete mix, which sets in approximately 10 minutes after mixing with water (depending on ambient temperature).
    Simply half fill the hole with water, then pour the post mix in.

    Fencing contractors typically allow 1½ to 2 bags per fence post (this varies depending on the hole and post size).

    We offer 33% discount on post-mix when you pay & collect in store!
    Stock Availability: 5824 in stock
    £6.85 Exc. VAT