915 x 1830mm Highgrove Gate

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

Log-Lap should be installed horizontally.

- Log Lap Profile
- Machined from: 25 x 125mm
- Finished thickness: 20.5mm (at thickest point)
- Board coverage when fitted: 105mm
- High quality, slow grown redwood
- Pressure Treated (green), 15 year performance warranty - view the Downloads tab below for details
- We recommend this profile is installed horizontally
- 9.52 linear metres are needed to cover 1m²

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

Timber batten is a general purpose building material that has many uses for trade and DIY.

- Fine-sawn finish
- Pressure treated green
- This batten does not comply with BS5534, we stock blue batten which does meet this grade.

35mm Fence Panel Clips; used to attach fence panels to wooden posts. Minimum of 4 clips needed per fence panel.

- Fits fence panels up to 35mm thick
- Galvanised Steel