Search
Mon-Fri: 7am to 5pm | Sat: 8am to 12pm | Sun: Closed
Show Prices Inc. VAT
Product Catalogue
    Menu Close

    Anti-Rattle Panel Wedge

    Hardwood Anti-rattle Panel Wedge; designed to stop fence panels rattling when fitted into slotted concrete posts. To ensure a tight fit, tap the wedge into the gap between the fence panel and the post slot. Fix the wedge in position by driving a screw into the fence panel through the pre-drilled hole. For best results fit 4 wedges per panel, this may vary depending on your specific fence panel and concrete slot dimensions. This wedge is pressure treated brown.
    Screws sold separately.

    - Hardwood Wedge
    - Pre-drilled for 4.0mm screw
    - Pressure Treated (brown)

    Wedge Dimensions:
    - Height: 52mm
    - Width: 42mm
    - Depth: (approx.)17mm tapering to 7mm
    Availability: 40 in stock
    £1.00 Inc. VAT
    i h

    This hardwood anti-rattle fence panel wedge is designed to secure fence panels within slotted concrete posts, reducing movement and wind noise.

    To install, insert the wedge into the gap between the fence panel and concrete post slot to achieve a tight fit. Each wedge is pre-drilled for a 4.0mm screw, allowing it to be fixed directly through the panel for a secure hold.

    For standard installations, four wedges per panel are typically recommended, depending on panel and post slot dimensions.

    Pressure-treated (brown) for external use.

    *
    *
    *
    *
    Product tags
    Customers that ordered this item also bought:
    Picture of 1.05m Feather Edge Board

    1.05m Feather Edge Board

    125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
    Feather-edge can also be fitted horizontally as a budget cladding.

    - 125mm Board Width
    - 10 boards needed per linear metre (25mm overlap)
    - Cut from 22 x 125mm
    - Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
    - Homegrown Spruce
    - Sawn finish
    - Pressure treated green
    Stock Availability: 3178 in stock
    From £0.92 Inc. VAT
    Picture of Remix Coarse Rapid Setting Post-Mix 20kg

    Remix Coarse Rapid Setting Post-Mix 20kg

    Rapid setting post hole concrete, suitable for fixing all types of wooden, metal and concrete posts.

    Post Mix is a pre-blended, quick setting concrete mix, which sets in approximately 10 minutes after mixing with water (depending on ambient temperature).
    Simply half fill the hole with water, then pour the post mix in.

    Fencing contractors typically allow 1½ to 2 bags per fence post (this varies depending on the hole and post size).

    We offer 33% discount on post-mix when you pay & collect in store!
    Stock Availability: 1669 in stock
    £8.59 Inc. VAT
    Picture of 150mm x 1.83m Concrete Gravel Board

    150mm x 1.83m Concrete Gravel Board

    Concrete gravel boards slot between concrete posts to give fence panels a level surface to sit on. It is beneficial to use gravel boards if the ground is sloping; the gravel board is dug into the ground to create a level surface instead of digging in the fence panel. Raising the panel on a gravel board will help prevent rot caused by ground moisture, gravel boards also help to prevent damage to fence panels caused by lawn mowers and strimmers.

    - Dimensions: 45mm x 150mm x 1829mm
    - 20kg Each
    - C50 Concrete (a strong mix)
    - Two 5.5mm rebar set inside.
    Stock Availability: 398 in stock
    £17.94 Inc. VAT
    Picture of 2.7m Slotted Concrete Post

    2.7m Slotted Concrete Post

    2.7m slotted concrete post; fully slotted on both sides in a "H" design for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

    - Post Dimensions: 90mm x 110mm x 2700mm
    - Slot Dimensions: 55mm (tapering to 50mm) x 23mm
    - 52kg Each
    - C50 Concrete (a strong mix)
    - Four 5.5mm rebar set inside
    Stock Availability: 198 in stock
    £28.49 Inc. VAT
    Picture of 45mm Fence Panel U-Clip

    45mm Fence Panel U-Clip

    45mm Fence Panel Clips; used to attach fence panels to wooden posts. Minimum of 4 clips needed per fence panel.

    - Fits fence panels up to 45mm thick
    - Galvanised Steel
    Stock Availability: 405 in stock
    £0.66 Inc. VAT
    Picture of 2.4m Slotted Concrete Post

    2.4m Slotted Concrete Post

    2.4m slotted intermediate concrete post; fully slotted on both sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

    - Post Dimensions: 90mm x 110mm x 2400mm
    - Slot Dimensions: 55mm (tapering to 50mm) x 23mm
    - 46kg Each
    - C50 Concrete (a strong mix)
    - Four 5.5mm rebar set inside
    Stock Availability: 304 in stock
    £25.43 Inc. VAT