Bolt Down Post Support

This post support is used to install 75 x 75mm square timber posts on top of a wall. The corner clamp ensures posts fit securely. The rectangular base plate has two 17mm holes for fixings, the opposite side has a 325mm strap which adds strength and stability when fixed to a wall.

- Designed to fit 75 x 75mm square timber posts
- Bolt-Grip post securing system
- Bolt down plate: 88mm x 150mm
- Bolt holes: 6 x 17mm Ø
- Manufactured from 2mm thick steel
- Welded construction
- Galvanised finish for durability outdoors

This post support is designed to hold a 75 x 75mm square wooden post in position when it’s not possible to concrete a post into the ground. The metal fins inside of the post support wedge into the timber ensuring a quick and secure fit.

- Designed to fit 75 x 75mm square wooden posts
- Fin-Grip post support system
- Bolt down plate: 150mm x 150mm
- Bolt holes: 4 x 12mm Ø holes for bolting down the base (approx. 115mm hole centres)
- Manufactured from 2mm thick steel
- Welded construction
- Galvanised finish for durability outdoors

This post support is designed to hold a 75 x 75mm square wooden post in position when it’s not possible to concrete a post into the ground. The bolt-clamp on the side of the post support ensures a quick and secure fit. The rectangular base plate enables flush fitting next to walls/obstructions, it's also a good fit when mounting on top of walls.

- Designed to fit 75 x 75mm square wooden posts
- Bolt-Grip post securing system
- Bolt down plate: 95mm x 175mm - flush fitting
- Bolt holes: 4 x 12mm Ø holes for bolting down the base
- Manufactured from 2mm thick steel
- Welded construction
- Galvanised finish for durability outdoors

This post support is designed to hold a 100 x 100mm square wooden post in position when it’s not possible to concrete a post into the ground. The metal fins inside of the post support wedge into the timber ensuring a quick and secure fit.

- Designed to fit 100 x 100mm square wooden posts
- Fin-Grip post securing system
- Bolt down plate: 170mm x 170mm
- Bolt holes: 4 x 12mm Ø holes for bolting down the base (approx. 135mm hole centres)
- Manufactured from 2mm thick steel
- Welded construction
- Galvanised finish for durability outdoors

This post support is designed to hold a 100 x 100mm square wooden post in position when it’s not possible to concrete a post into the ground. The bolt-clamp on the side of the post support ensures a quick and secure fit. The rectangular base plate enables flush fitting next to walls/obstructions, it's also a good fit when mounted on top of walls.

- Designed to fit 100 x 100mm square wooden posts
- Bolt-Grip post securing system
- Bolt down plate: 108mm x 205mm - flush fitting
- Bolt holes: 4 x 12mm Ø holes for bolting down the base
- Manufactured from 2mm thick steel
- Welded construction
- Galvanised finish for durability outdoors

This post support is designed to hold a 150 x 150mm square wooden post in position when it’s not possible to concrete a post into the ground. The bolt-clamp on the side of the post support ensures a quick and secure fit.

- Designed to fit 150 x 150mm square wooden posts
- Bolt-Grip post securing system
- Bolt down plate: 250 x 250mm
- Bolt holes: 4 x 12mm Ø holes for bolting down the base (approx. 210mm hole centres)
- Manufactured from heavy gauge 3mm thick steel
- Welded construction
- Galvanised finish for durability outdoors