Brown Wall Plugs - Box of 100

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

Steel washer, for general use with bolts and threaded bar (studding).
BZP (Bright Zinc Plate) finish.

Dimensions: 2mm x 24mm Diameter
11mm Bolt Hole: To suit M10 thread

Composite Prime HD Deck® XS, premium quality composite decking. HD Deck® XS is a dual-sided board offering the choice of two groove patterns. Give your garden a smart, contemporary look with HD Deck® XS decking. Suitable for domestic and commercial use.

Key Information:
- Range: Composite Prime, HD Deck® XS
- Colour: Silver
- Board dimensions: 25 x 146mm x 3.6m
- Dual sided board with two groove patterns
- Sustainable, produced from recycled materials
- Slip resistant
- Durable
- Safe to pressure wash
- Barefoot safe

Check out our Downloads tab below for additional information

- Experience the luxury of softwood decking crafted from premium 5th grade Redwood
- Enjoy enhanced durability with a dual-sided groove pattern
- Pressure treated green for long-lasting beauty and backed by a generous 15-year warranty
- Effortless installation with maximum joist centres of 600mm
- A timeless favourite since 2002, continuously stocked for your convenience

A self tapping bolt suitable for concrete, stone, brick, marble, wood and block (solid or hollow). Safe anchorage achieved without the need of high tightening forces. Can be removed and re-fixed into the same hole, providing the thread is correctly aligned. No expansion forces enables close to the edge fixing.

Drill Bit Dia. - 10mm
Anchor Length - 150mm
Washer Size - 12mm (M12)
Min Hole Depth - 70mm
Min Over Drill Depth - 20mm
Min. Embed Depth - 50mm
Max. Fixture Thickness - 100mm
Drill Bit Dia. for clearance - 12mm (to prevent binding when tightening bolt)
Head Type - Hex Head, 17mm (Across Flats)
Driver Type - Impact driver, socket, spanner
Max Tightening Torque - 60Nm

Treated timber carcassing for general building purposes.
- Machined from 47 x 150mm, finished size approx. 45 x 145mm
- Regularised smooth finish
- Certified grade C24
- Top quality, slow-grown softwood
- Pressure-treated green