Faithfull Utility Paint Brush 2"

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

CLS (Canadian Lumber Standard), a general purpose, non-structural grade, untreated building timber. Typically used for internal first fix applications, E.g. non-structural framing & stud walls.

- Machined from 50 x 75mm, finished size approx. 38 x 63mm
- Smooth regularised finish
- Grade C16
- Untreated softwood

Softwood sleeper, pressure treated green, sawn finish, non-structural timber. Mainly used for landscaping projects; for raised beds and retaining walls but could have many other uses.

- Dimensions: 100 x 200mm x 2.4m
- Sawn Finish
- Homegrown Softwood, locally produced in the UK
- Pressure Treated - Green

General purpose, pressure treated, sawn finish timber. Mainly used as fence posts but could have many other uses.

- Dimensions: 100 x 100mm x 1.8m
- Sawn Finish
- Homegrown Softwood, locally produced in the UK
- Pressure Treated - Green

The Simpson Strong-Tie EFIXR553, is a light Reinforced Angle Bracket (reinforced in corner). A light, sturdy, versatile metal bracket for a wide range of applications. Galvanised for corrosion resistance.

Thickness: 2.0mm
Width: 30mm
Length: 50mm x 54mm
Fixing Holes: 5.0mm (x8),
Obround Slot: 6.5mm x 30mm (on 50mm flange)
Obround Slot: 8.5mm x 30mm ( on 54mm flange)

Pre-Cut Noggins (45x95mm) for Stronger Composite Decking. Save time and effort with pre-cut noggins for 300mm joist centres. Pressure treated for durability.
- Machined from 47 x 100mm, finished size approx. 45 x 95mm
- Smooth regularised finish
- Good quality, slow grown softwood

If you aren't sure how many noggins you need for your timber framework, please get in touch for advice.