Machined from a single piece of 100 x 100mm redwood. These timber "H" posts are slotted to accept a fence panel. - Planed from 100 x 100mm, finished size approx. 95 x 95mm - Slots on 2 sides, 50mm wide x 20mm deep. - Good quality slow-grown softwood - Planed finish, with 4 rounded corners - Pressure treated green
Rapid setting post hole concrete, suitable for fixing all types of wooden, metal and concrete posts.
Post Mix is a pre-blended, quick setting concrete mix, which sets in approximately 10 minutes after mixing with water (depending on ambient temperature). Simply half fill the hole with water, then pour the post mix in.
Fencing contractors typically allow 1½ to 2 bags per fence post (this varies depending on the hole and post size).
We offer 33% discount on post-mix when you pay & collect in store!
Sawn timber post, pressure treated green. Mainly used for post & rail fencing, these posts have one flat end & one 30° back-weathered end to help prevent the top from rotting by allowing water to run off. Please note; the stated length includes the weathered top.
- 75 x 125mm x 1.8m Timber Post - Homegrown softwood - Sawn finish - Pressure treated green - 30° back-weathered top
Sawn timber post, pressure treated green. Mainly used for post & rail fencing, these posts have a 30° back-weathered top to help prevent rotting by allowing water to run off. Please note; the stated length includes the weathered top.
- 75 x 125mm x 2.4m Timber Post - Homegrown softwood - Sawn finish - Pressure treated green - 30° back-weathered top