Fencer's Graft Type 1

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

Arris rail is a triangular shaped fencing rail for use with feather edge fencing. This rail is designed to fit into notched posts or can be attached to standard posts with an arris rail bracket. Arris rail can also be used (under felt) around the edges of flat roofing, or as corner reinforcement when building wooden crates etc.

- Cut from 75 x 75mm (Square)
- Rail Dimensions: 74 x 74mm x 2.4m, 105mm on longest edge
- Sawn Finish
- Homegrown Softwood, locally produced in the UK
- Pressure Treated - Green

Rapid setting post hole concrete, suitable for fixing all types of wooden, metal and concrete posts.

Post Mix is a pre-blended, quick setting concrete mix, which sets in approximately 10 minutes after mixing with water (depending on ambient temperature).
Simply half fill the hole with water, then pour the post mix in.

Fencing contractors typically allow 1½ to 2 bags per fence post (this varies depending on the hole and post size).

We offer 33% discount on post-mix when you pay & collect in store!

Timber posts with three 'V' notches for arris rails: designed to be used with 1.65m feather-edge boarding. Pressure treatment, incised, UC4.

- 100 x 125mm Timber Post
- 3 Triangular 'V'-notches to suit arris rail
- The notches are spaced to suit 1.65m Feather-edge + 150mm Gravel Board - more details in full description below
- Homegrown softwood, locally produced in the UK
- Sawn finish
- Incised at the bottom of the post, to just above ground level
- Pressure treated green

Pressure-treated decking boards, perfect for paths, fences & more!
These versatile, homegrown softwood boards are strong, durable, and ideal for a variety of garden projects. Available for Bristol delivery.
- 22 x 150mm x 2.4m
- Sawn finish
- Pressure treated

High performance woodscrews, manufactured from hardened steel. Superdrive Screws have a type 17 point, knurled thread with a wax coating for quick insertion.

Box of 200 screws
Free PZ1 driving bit included with every box