Fencer's Graft Type 2

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

Galvanised steel bracket for attaching 75mm triangular Arris Rail to square posts or wall plates. Minimum post/wall plate width is 45mm.

Angle: 62 x 62mm (suits 75mm Arris Rail)
Wings: 42 x 155mm (overall width)
Length: 285mm
Fixing Holes: (10x) 5mm diameter + (2x) 27mm x 6mm slots

Arris rail is a triangular shaped fencing rail for use with feather edge fencing. This rail is designed to fit into notched posts or can be attached to standard posts with an arris rail bracket. Arris rail can also be used (under felt) around the edges of flat roofing, or as corner reinorcement when building wooden crates etc.

- Cut from 75 x 75mm (Square)
- Rail Dimensions: 74 x 74mm x 3.0m, 105mm on longest edge
- Sawn Finish
- Homegrown Softwood, locally produced in the UK
- Pressure Treated - Green

Postsaver Pro-Sleeves are a guaranteed, proven solution to ensure long-life fence posts.

The sleeve’s unique dual-layer, rot prevention technology excludes all the factors required for decay to occur at the ground-line. Unlike liquid coatings and bitumen paint, Postsaver Pro Sleeves maintain a barrier to the causes of decay even when the post cracks or splits.

Pro-Sleeves are proven to prevent ground rot with over 26 years of volume use in 30+ countries worldwide. Backed up with 20 years of excellent independent test data, they are easily heat applied with a blowtorch in a matter of seconds, and sleeved posts can be installed in all the usual ways.

Simply fit Postsaver Pro-Sleeves and relax, safe in the knowledge that your posts are protected from rot for 20 years.

Postsaver: Do it Once, Do It Right

This Postsaver is suitable for use on the following post sizes:
• 75 x 150mm
• 100 x 125mm
• 125 x 125mm
• 150 x 150mm

• 150mm Round

General purpose, pressure treated, sawn finish timber. Mainly used as fence posts but could have many other uses.

- Dimensions: 75 x 75mm x 3.0m
- Homegrown Softwood, locally produced in the UK
- Sawn & incised finish
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green