20mm x 10m Fixing Band

The Simpson Strong-Tie EFIXR553, is a light Reinforced Angle Bracket (reinforced in corner). A light, sturdy, versatile metal bracket for a wide range of applications. Galvanised for corrosion resistance.

Thickness: 2.0mm
Width: 30mm
Length: 50mm x 54mm
Fixing Holes: 5.0mm (x8),
Obround Slot: 6.5mm x 30mm (on 50mm flange)
Obround Slot: 8.5mm x 30mm ( on 54mm flange)

Roofing Bolt; designed for bolting through metal sheets but have many other uses.
14mm bolt head, with 2mm cross-slots to fit flat head screw driver blade.
Supplied with one square nut, hex nuts and washers sold separately.
BZP finish (Bright Zinc Plate).

A heavy steel washer, for general use with bolts and threaded bar (studding).
BZP (Bright Zinc Plate) finish.

Dimensions: 1.5mm x 13.5mm Diameter
6.5mm Bolt Hole: To suit M6 thread

The Simpson Strong-Tie ABR90 (previously E2/2.5/7090) is a heavy-duty reinforced angle bracket (reinforced in corner) for many applications. Galvanised for corrosion resistance.

Measurements (Ref. image 2):
A: 90mm
B: 90mm
C: 65mm
Thickness: 2.5mm
Fixing Holes: 11.5mm (x2) + 5.0mm (x20)

CLS (Canadian Lumber Standard), a general purpose, non-structural grade, untreated building timber. Typically used for internal first fix applications, E.g. non-structural framing & stud walls.

- Machined from 50 x 100mm, finished size approx. 38 x 89mm
- Smooth regularised finish
- Grade C16
- Untreated softwood

Timber batten is a general purpose building material that has many uses for trade and DIY.

- Fine-sawn finish
- Pressure treated green