1500mm Diamond Trellis - Flat

Planed and pressure-treated, joinery grade softwood.
Build your own contemporary slatted screen fencing. Create heavy duty and decorative fencing screens, perfect for fence panels to create partitions, obscure visibility, pergola shade screens, a contemporary way to increase the height of fencing & garden walls.

- Planed all round timber, with 4 eased (rounded) corners
- Machined from 25 x 50mm, finished size 20 x 45mm
- 2.4m long ±5mm
- High quality, slow grown redwood
- Pressure Treated green, 15 year Treat-Right Warranty, details in Downloads tab below
- 18.2 linear metres needed to cover 1m², this is based on a 10mm gap between slats

If you need help with your calculations for your screening project, please get in touch.

Hex head coach screw, for heavy-duty applications. Suitable for fixing into timber, can fix into brickwork and masonry with an M8 plug . M8 washers sold separately.

- Length excludes 5mm bolt head
- Bright Zinc Plated finish (BZP)
- Pre-drill timber with 4 - 6mm pilot hole
- Hex Head fits a 13mm Spanner

30mm Fence Panel L-Clip, a useful panel clip for discreet fixing that can only be seen from one side. Can also be used to fix gravel boards, as well as many uses as a general purpose corner bracket.

- Angle: 30 x 30mm
- Height: 50mm
- Galvanised Steel

A light duty fixing for jobs where speed of installation is important.
Hammer fixings work in a similar way to screws and plugs, the hammer fixing screw has a special thread that can be hammered into the plug and loosened / screwed out if required.

Installation:
Pre-drill a 10mm pilot hole through the item that you're fixing and into the masonry or brickwork. Lightly tap the fixing through the pilot hole with a hammer until the plug is flush. EG. if you're fixing a timber wall plate, the plug fits inside the timber as well as the wall. Once the plug is flush with the timber, hit the head of the screw harder to drive it into the plastic sleeve until tight.

Minimum fixing depth: 45mm

General purpose, pressure treated, sawn finish timber. Mainly used as fence posts but could have many other uses.

- Dimensions: 100 x 100mm x 1.8m
- Sawn Finish
- Homegrown Softwood, locally produced in the UK
- Pressure Treated - Green

Diamond Trellis panels are constructed using good quality planed battens, they are framed all round with rebated framing. This attractive trellis panel obscures visibilty between boundaries without the need of a solid fence or the need to block out daylight. This product is pressure treated green.

- Width: 1829mm ( 6' )
- Height: (approx.) 425mm (Middle) → 320mm (Edge)
- Hole Size: (approx.) 50 x 50mm.
- Frame Thickness: 30mm
- Pressure Treated