600mm Diamond Trellis - Flat

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

Pointed Pegs can be used for many purposes e.g. securing Gravel Boards and Sleepers, or as survey (marking out) pegs in the construction industry.

Pointed Pegs are a sawn finish and pressure treated green. Standard stock sizes are listed, bespoke sizes can be cut to order.

Galvanised steel bracket for attaching 75mm triangular Arris Rail to square posts or wall plates. Minimum post/wall plate width is 45mm.

Angle: 62 x 62mm (suits 75mm Arris Rail)
Wings: 42 x 155mm (overall width)
Length: 285mm
Fixing Holes: (10x) 5mm diameter + (2x) 27mm x 6mm slots

General purpose, pressure treated, sawn finish timber. Mainly used as fence posts but could have many other uses.

- Dimensions: 75 x 75mm x 2.1m
- Sawn Finish
- Homegrown Softwood, locally produced in the UK
- Pressure Treated - Green

Rapid setting post hole concrete, suitable for fixing all types of wooden, metal and concrete posts.

Post Mix is a pre-blended, quick setting concrete mix, which sets in approximately 10 minutes after mixing with water (depending on ambient temperature).
Simply half fill the hole with water, then pour the post mix in.

Fencing contractors typically allow 1½ to 2 bags per fence post (this varies depending on the hole and post size).

We offer 33% discount on post-mix when you pay & collect in store!

The Simpson Strong-Tie EA554, is a light yet sturdy Reinforced Angle Bracket (reinforced in corner). A metal bracket for strengthening corners and connecting a wide range items. Galvanised for corrosion resistance.

Thickness: 2.0mm
Width: 40mm
Length: 53mm x 53mm
Fixing Holes: 11.0mm (x2) + 5.0mm (x8)