8m/27ft x 25mm Hi Vis Tape Measure (Width 22mm)

Planed and pressure-treated, joinery grade softwood.

Build your own contemporary slatted screen fencing. Create heavy duty and decorative fencing screens, perfect for fence panels to create partitions, obscure visibility, pergola shade screens, a contemporary way to increase the height of fencing & garden walls.

- Planed all round timber, with 2 eased (rounded) corners
- Machined from 25 x 75mm, finished size 20 x 70mm
- High quality, slow grown redwood
- Pressure Treated green, 15 year Treat-Right Warranty, details in Downloads tab below
- 12.5 linear metres needed to cover 1m², this is based on a 10mm gap between slats
- We recommend fitting vertical battens at 600mm centres (max.)

If you need help to work out what you need for your screening project, please get in touch.

Galvanised joist hanger for constructing timber to timber framework. Precision formed and engineered for fast installation and maximum loads.

- Suitable for 47mm wide timber
- Width: 146.4mm (including fixing wings)
- Length: 236.5mm
- Depth: 52.1mm

A self-tapping Masonry Screw for brick and concrete, a popular fixing to fit window frames. An easy to use fixing that does not require plastic plugs, it has a high resistance to fire compared to nylon fixings. This screw is a friction fixing which minimises expansion stress in the base material, this allows fixing near to the edge, and gives greater loading performance than most nylon fixings.
To use: pre-drill a 6mm pilot hole, use a drill or impact driver fitted with T30 bit to drive the screw in.

T30 bit and white cover caps included when bought in box quantities of 100.

Drill Bit Dia. - 6mm
Min. Embed Depth - 45mm
Head Type - T30 Torx
Driver Type - Drill / Impact Driver

A self-tapping Masonry Screw for brick and concrete, a popular fixing to fit window frames. An easy to use fixing that does not require plastic plugs, it has a high resistance to fire compared to nylon fixings. This screw is a friction fixing which minimises expansion stress in the base material, this allows fixing near to the edge, and gives greater loading performance than most nylon fixings.
To use: pre-drill a 6mm pilot hole, use a drill or impact driver fitted with T30 bit to drive the screw in.

T30 bit and white cover caps included when bought in box quantities of 100.

Drill Bit Dia. - 6mm
Min. Embed Depth - 45mm
Head Type - T30 Torx
Driver Type - Drill / Impact Driver

C24 Treated Carcassing Timber - Strong & Reliable
- Machined from 47 x 150mm, finished size approx. 45 x 145mm
- Smooth regularised finish
- Grade C24
- Good quality, slow grown softwood
- Pressure treated green

22mm x 600mm x 2400mm Egger chipboard board with tongue and grooved sides & ends

- Moisture resistant P5 grade
- 22mm flooring can be used with joists up to 600mm apart (centre - centre).
- Suitable for use in damp or humid environments, such as kitchens and bathrooms
- To be laid in dry conditions only
- Manufactured in the UK in accordance with BS EN 312
- Confirmed fire resistance of 30 minutes, tested in accordance with BS EN 1365-2:2014

* Please note that the the Tongues & Grooves on this Egger chipboard flooring are not compatible with Caberfloor or Kronospan chipboard flooring