Hinges

These Grade 13 Stainless Steel Ball Bearing Butt Hinge combines robust durability with smooth operation to ensure your gates or doors swing effortlessly every time. Built to last and ideal for small gates and doors. With a brushed stainless steel finish, the classic design complements any small gate or door.

- Constructed from Grade 316 stainless steel.
- Certified CE13 BSN1935.
- Includes stainless steel screws.
- Certifire approved product.
- Quality and performance BSEN1935.
- Fire safety BSEN1634 - for use on 30 minute and 1 hour fire doors.

When selecting hinges for your gate please ensure you choose ones with the correct loading application.

These hinges are sold in pairs and include stainless steel screws.

Specialist field gate hinge with the eye on the corner of the hinge.
The off set hinge has the eye set at approximately 45 degree angle from the corner of the hinge.

Fits a 19mm hanging pin.

Hanging pins & fixings are sold separately.

Please note that this item is not stocked.
Nationwide delivery is available on this product, call 0117 967 4382 for details or submit a contact form below. Product code: 7IFGTBOEC125

Specialist field gate hinge with the eye on the corner of the hinge.

Fits a 19mm hanging pin.

Hanging pins & fixings are sold separately.

Please note that this item is not stocked.
Nationwide delivery is available on this product, call 0117 967 4382 for details or submit a contact form below. Product code: 7IFGTBSEC125

A heavy-duty galvanised double strap bottom band, for hanging a 75mm thick five bar gate.
An M10 x 100mm carriage bolt should be fitted through the slot of this fitting and through the hanging stile of the gate. The slot allows plenty of adjustment to level the gate.

- Length: 125mm
- Depth: 50mm
- Internal Width: 75mm
- Hanging eye for 19mm hook
- Slotted for M10 carriage bolt
- Galvanised finish

Hanging pins and fixings sold separately.

Suitable for light duty applications, these bright zinc plated hinges are popular for use in animal housing, eg. chicken runs, hutches etc.

This adjustable gate hanger has a 19mm pin and is galvanised for corrosion resistance. Typically used for fitting pairs of wooden five bar gates to timber gate posts, the adjustable hook length enables the fitter to easily make sure that the gates line up perfectly in the middle. The 100x100mm fixing plate has four holes for screws or bolts.

This 19mm hook to drive is normally used for fitting the bottom part of a standard field gate hinge to a timber gate post. The 19x19x175mm square spike is designed to be driven in with a club/ sledge hammer. This enables the fitter to easily adjust the length of the hook in order to make the gate plumb. A pilot hole must be drilled to avoid splitting the post. Galvanised to prevent rust.

Galvanised for corrosion resistance, this 19mm gate pin has 4 bolt holes for a very secure fixing.

Galvanised for corrosion resistance, this 19mm gate pin has 2 bolt holes on a 50 x 200mm plate.

19mm gate hanger designed to be built into brickwork. This item is galvanised for corrosion resistance.

This hook to screw has a 19mm pin to fit a standard field gate hinge, to a timber gate post. The pin has a hole at the top to fit a small bolt to stop the gate being lifted off the hinge. The 18x190mm screw thread enables the fitter to easily adjust the length of the hook in order to make the gate plumb, which is ideal if re-using old posts that have moved over time. A pilot hole must be drilled to avoid splitting the post. Galvanised to prevent rust.

This 19mm hook to bolt is normally used for fitting the top part of a standard field gate hinge to a timber gate post. Suitable for posts between 125mm to 200mm. Galvanised to prevent rust.

This 19mm hook to bolt is used for hanging field gates from a brick pillar without having to secure timber to the pillar first.

These BZP strap hinges are most commonly used for hanging bifolding gates.

Perfect for hanging garden gates or shed doors, these medium tee hinges are painted black.
As a general rule we recommend using hinges that cover half the width of the gate/door.

Pack includes 2 hinges (1 pair). All fixings are included.