Hinges

This galvanised field gate hinge set has an off-set bottom pivot point (rocker plate) which causes the swinging end of a field gate to rise as it opens. The off-set pivot point causes the gate to return to the centre when not held in the open position.

- The approximate rise (at the swinging end) is 75mm per metre of gate width - e.g. if fitted to a 10' (3.05m) gate, the rise at the swinging end is approx. 229mm.
- Suitable for hanging 75mm thick wooden field gates.
- This hinge this type of hinge can only be fitted between posts (not on the back of posts), which allows the gate to swing forward and backwards.
- The minimum post size that the rocker plate can be fitted to is 175mm.

Set includes:
1x 600mm (24") double strap top band
1x bottom gate fitting with rocker plate
1x field gate hook to bolt
All necessary fixings
Galvanised finish

Stainless Steel press fit security collar, designed to prevent gates from being lifted off of a 19mm hook.

This kit includes a pair of 350mm tee hinges, an auto gate catch & all the screws required to fit them.
Ideal for hanging small gates like the hampton & picket gates.

This kit includes a pair of 350mm tee hinges, an auto gate catch & all the screws required to fit them.
Ideal for hanging small gates like the hampton & picket gates.

Price is for one Adjustable Gate Eye with 2 Nuts. Please note this product is usually used in pairs.

- 21mm Internal eye diameter; suits 19mm hook / pin
- 45mm External eye diameter
- 250mm Bolt length with 240mm of thread
- M20 thread
- Two M20 nuts included
- Bright Zinc Plated finish

Designed to hang metal framed gates such as metal farm gates, but could have other heavy duty uses. This gate eye is compatible with all 19mm field gate hooks.

When used to hang steel gates, the included nuts should be fitted either side of the vertical stile. The nut positions can be adjusted to level the the gate. For timber framed field gates we recommend using an adjustable bottom fitting instead.

Price is for one Adjustable Gate Eye with 2 Nuts. Please note this product is usually used in pairs.

- 21mm Internal eye diameter; suits 19mm hook / pin
- 45mm External eye diameter
- 100mm Bolt length with 86mm of thread
- M20 thread
- Two M20 nuts included
- Bright Zinc Plated finish

Designed to hang metal framed gates such as metal farm gates, but could have other heavy duty uses. This gate eye is compatible with all 19mm field gate hooks.

When used to hang steel gates, the included nuts should be fitted either side of the vertical stile. The nut positions can be adjusted to level the the gate. For timber framed field gates we recommend using an adjustable bottom fitting instead.

This is a special order item, typically available within 1-2 working days
Price is for one Adjustable Gate Eye with 2 Nuts. Please note this product is usually used in pairs.

- Suits 12mm hook / pin
- 100mm Bolt length to centre of eye
- M12 thread
- Two M12 nuts included
- Bright Zinc Plated finish

Designed to hang metal framed gates. The nut positions can be adjusted to level the the gate.

Galvanised hook on plate, for use with hinges with a 18mm eye.

Black hook on plate, for use with hinges with a 19mm eye.

Galvanised hook on plate, for use with hinges with a 16mm eye.

Galvanised hook on plate, for use with hinges with a 12mm eye.

This kit includes a pair of 450mm tee hinges, a 150mm brenton padbolt, a 150mm plain ring latch & all of the screws required to fit them.
Perfect for hanging most of our timber garden gates.

This kit includes a pair of 450mm tee hinges, a 150mm brenton padbolt, a 150mm plain ring latch & all of the screws required to fit them.
Perfect for hanging most of our timber garden gates.

Hand-forged by master craftsmen using traditional methods to achieve a unique product made to the highest standards.

These T Hinges have a ‘penny shaped’ round end and is one of our most popular choices for hanging ledged and braced/plank doors.

They are hot forged i.e. drawn to shape, not welded or fabricated and with the knuckle being fashioned in the traditional way it makes for a very strong product.

The traditional way of choosing a hinge size means it should reach two thirds of the way across the door but providing it reaches at least half way across it should carry the weight of most doors with no problems. For especially heavy doors a third hinge can be used (three on one door).

Sold as a set and supplied with necessary fixing screws.

Hand-forged by master craftsmen using traditional methods to achieve a unique product made to the highest standards.

These T Hinges have a ‘penny shaped’ round end and is one of our most popular choices for hanging ledged and braced/plank doors.

They are hot forged i.e. drawn to shape, not welded or fabricated and with the knuckle being fashioned in the traditional way it makes for a very strong product.

The traditional way of choosing a hinge size means it should reach two thirds of the way across the door but providing it reaches at least half way across it should carry the weight of most doors with no problems. For especially heavy doors a third hinge can be used (three on one door).

Sold as a set and supplied with necessary fixing screws.