Hinges

Available painted black or hot dip galvanised to ensure resistance to corrosion & rust, these hook & band hinges are ideal for hanging heavy duty gates & doors.
The crank allows the gate to sit flush with the post if hanging on the front or the back of the post.

As a general rule we recommend using hinges that cover half the width of the gate/door.
Fixings sold separately.

A pair of heavy-duty gate hinges suitable for fitting gates, shed doors etc. Cups are fitted to the top & bottom of the pivot, which secures the gate firmly in position and prevents the gate from being lifted or removed. They are galvanised for long service life. Fixings are sold separately, contact us if you would like to add fixings to your order.

Dimensions:
Cups: 67 x 67mm
Length excluding pivot: 750mm
Length including pivot: 775mm
Pivot: 19mm diameter
Hinge width: 57mm
Hinge depth: 4mm
Screw holes: 7mm diameter, countersunk
Bolt hole: 14 x 14mm (use M12 carriage bolt, cup square hex)

Hot dip galvanised to ensure resistance to corrosion & rust, these hook & band hinges for suitable for hanging heavy duty gates & doors.
As a general rule we recommend using hinges that cover half the width of the gate/door.

Fixings sold separately.

Grade 201 Stainless Steel, these Grade 7 CE Marked Ball Bearing Hinges are suitable for residential use on doors up to 40Kg. The ball bearing knuckle gives a smooth function which emphasises the quality of the hinge. Each pair of hinges is also retail packaged, making them more appealing to the consumer and easier to display in your store.

Dimensions (height x open width x thickness):
76mm x 51mm x 2.0mm

Available painted black or hot dip galvanised to ensure resistance to corrosion & rust, these hook & band hinges are ideal for hanging heavy duty gates & doors.
The crank allows the gate to sit flush with the post if hanging on the front or the back of the post.

As a general rule we recommend using hinges that cover half the width of the gate/door.
Fixings sold separately.

Available painted black or hot dip galvanised to ensure resistance to corrosion & rust, these hook & band hinges are ideal for hanging heavy duty gates & doors.
The crank allows the gate to sit flush with the post if hanging on the front or the back of the post.

As a general rule we recommend using hinges that cover half the width of the gate/door.
Fixings sold separately.

Heavy duty gate hinges for hanging gates, shed doors etc. Cups are fitted top & bottom which prevents the gate from being lifted off.
Fixings are not included.

Hot dip galvanised to ensure resistance to corrosion & rust, these hook & band hinges for suitable for hanging heavy duty gates & doors.
As a general rule we recommend using hinges that cover half the width of the gate/door.

Fixings sold separately.

Heavy duty hinges ideal for use on high-use/heavy gates and external doors, these robust hinges provide adjustability, allowing the installer to easily align gates during fitting and also give adjustment after fitting to compensate for gate drop over time.
Available from stock galvanised and to order in epoxy black finish.

Fixings sold separately.

Galvanised adjustable bottom gate fitting for 3" (75mm) thick gate. The eye takes a 19mm pin.

Hand-forged by master craftsmen using traditional methods to achieve a unique product made to the highest standards.

These T Hinges have a ‘penny shaped’ round end and is one of our most popular choices for hanging ledged and braced/plank doors.

They are hot forged i.e. drawn to shape, not welded or fabricated and with the knuckle being fashioned in the traditional way it makes for a very strong product.

The traditional way of choosing a hinge size means it should reach two thirds of the way across the door but providing it reaches at least half way across it should carry the weight of most doors with no problems. For especially heavy doors a third hinge can be used (three on one door).

Sold as a set and supplied with necessary fixing screws.

Hand-forged by master craftsmen using traditional methods to achieve a unique product made to the highest standards.

These T Hinges have a ‘penny shaped’ round end and is one of our most popular choices for hanging ledged and braced/plank doors.

They are hot forged i.e. drawn to shape, not welded or fabricated and with the knuckle being fashioned in the traditional way it makes for a very strong product.

The traditional way of choosing a hinge size means it should reach two thirds of the way across the door but providing it reaches at least half way across it should carry the weight of most doors with no problems. For especially heavy doors a third hinge can be used (three on one door).

Sold as a set and supplied with necessary fixing screws.

This kit includes a pair of 450mm tee hinges, a 150mm brenton padbolt, a 150mm plain ring latch & all of the screws required to fit them.
Perfect for hanging most of our timber garden gates.

This kit includes a pair of 450mm tee hinges, a 150mm brenton padbolt, a 150mm plain ring latch & all of the screws required to fit them.
Perfect for hanging most of our timber garden gates.

Galvanised hook on plate, for use with hinges with a 12mm eye.