Search
Mon-Fri: 7am to 5pm | Sat: 8am to 12pm | Sun: Closed
Show Prices Inc. VAT
Product Catalogue
Menu Close

M12 Nyloc Nut

Hex Nyloc Nut with metric thread, for general use with bolts and threaded bar (studding).
The Nyloc insert prevents accidental loosening caused by vibration.
BZP (Bright Zinc Plate) finish.

Thread: 12mm - Metric
Depth: 12mm
Spanner Size: 19mm
Availability: 172 in stock
£0.13 Inc. VAT
i h

Hex Nyloc Nut with metric thread, for general use with bolts and threaded bar (studding).
The Nyloc insert prevents accidental loosening caused by vibration.
BZP (Bright Zinc Plate) finish.


Thread: 12mm - Metric
Depth: 12mm
Spanner Size: 19mm

Product tags
Customers that ordered this item also bought:
Picture of M12 Form C Washer

M12 Form C Washer

Steel washer, for general use with bolts and threaded bar (studding).
BZP (Bright Zinc Plate) finish.

Dimensions: 2mm x 28mm Diameter
13mm Bolt Hole: To suit M12 thread
Stock Availability: 388 in stock
From £0.11 Inc. VAT
Picture of 47 x 150mm x 3.0m C24 - Treated

47 x 150mm x 3.0m C24 - Treated

Treated carcassing timber conquers outdoor projects!
- Machined from 47 x 150mm, finished size approx. 45 x 145mm
- Smooth finish and C24 graded
- Premium quality, slow-grown softwood
- Pressure-treated green for durability
Stock Availability: 457 in stock
£12.42 Inc. VAT
Picture of 35mm Fence Panel U-Clip

35mm Fence Panel U-Clip

35mm Fence Panel Clips; used to attach fence panels to wooden posts. Minimum of 4 clips needed per fence panel.

- Fits fence panels up to 35mm thick
- Galvanised Steel
Stock Availability: 39 in stock
£0.66 Inc. VAT
Picture of M12 (12mm) x 1000mm BZP Threaded Bar

M12 (12mm) x 1000mm BZP Threaded Bar

Mild steel threaded bar / studding.

- M12 (metric 12mm) thread diameter
- 1.0m length
- Mild steel grade 4.6
- Bright Zinc Plated finish (BZP)
- Nuts & washers sold separately
Stock Availability: 31 in stock
£2.68 Inc. VAT
Picture of 80mm Fencemate Adjustable Bolt Down Post Support

80mm Fencemate Adjustable Bolt Down Post Support

A post support fitting for installing timber posts and timber framework. The timber sits on the Post Support out of ground contact, which prevents rotting due to moisture from the ground. The height/level of the square support plate can easily be adjusted which is useful when building structures on uneven ground. Suitable for structurally supported timber posts and framework that need to last a long time e.g. for a basic timber porch or decking framework. Not recommended for free standing posts e.g. fence posts.

Installation: drill a 22mm diameter hole in the end of the timber post for the threaded bar to fit into, the depth of hole will vary depending on how much elevation is required. The post should sit firmly over the threaded bar down to the square support plate. The two nuts are tightened against each other to lock the support plate in the required position. The bottom of the post support is designed to be bolted down to a concrete base, we recommend using M10 Thunder Bolts.

- Welded construction, galvanised steel
- Total Height - 255mm
- Threaded bar - 22mm diameter
- Square support plate - 80 x 80mm x 4.5mm
- Bolt Down Plate - 80 x 80mm x 4.5mm
- 11mm fixing holes (x8)
Stock Availability: 10 in stock
£17.71 Inc. VAT
Picture of Premium Overlap Panel 1524mm (5')

Premium Overlap Panel 1524mm (5')

A premium quality Overlap Panel which is built to last.

Height: 1524mm (5')
Width: 1829mm (6')

- Fully pressure treated panels
- Nailed construction
- Straight-edge, horizontal, sawn-finish slats
- Five vertical battens on both sides (approx. 18 x 38mm)
- Framed top and bottom on both sides (approx. 18 x 38mm)
- Finished and protected with a top capping strip
- These panels look the same from both sides, perfect for shared boundaries
- Manufactured in the U.K.
Stock Availability: 86 in stock
£39.26 Inc. VAT