M20 Square Plate Washer

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

Hex nut with metric thread, for general use with bolts and threaded bar (studding).
BZP (Bright Zinc Plate) finish.

Thread: 20mm - Metric
Depth: 15mm
Spanner Size: 30mm

Graded to meet BS5534 standards, this batten is used in the building trade for roofing projects.

- Stained Blue*, for grade identification purposes
- Fine-sawn finish
- Pressure treated
- Complies with BS5534

*If blue batten is not available we occasionally have gold batten which meets the same standard

CLS (Canadian Lumber Standard), a general purpose, non-structural grade, untreated building timber. Typically used for internal first fix applications, E.g. non-structural framing & stud walls.

- Machined from 50 x 100mm, finished size approx. 38 x 89mm
- Smooth regularised finish
- Grade C16
- Untreated softwood

Treated carcassing timber for all of your general outdoor projects.
- Machined from 47 x 125mm, finished size approx. 45 x 120mm
- Smooth regularised finish
- Grade C24
- Good quality, slow grown softwood
- Pressure treated green

Mild steel threaded bar / studding.

- M20 (metric 20mm) thread diameter
- 1.0m length
- Mild steel grade 4.6
- Bright Zinc Plated finish (BZP)
- Nuts & washers sold separately