M8 Hex Nut

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

Steel washer, for general use with bolts and threaded bar (studding).
BZP (Bright Zinc Plate) finish.

Dimensions: 1.5mm x 21mm Diameter
9mm Bolt Hole: To suit M8 thread

Carriage Bolt; cup square hex, 20mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.

Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.

Supplied with one standard hex nut, washers sold separately.

Roofing Bolt; designed for bolting through metal sheets but have many other uses.
14mm bolt head, with 2mm cross-slots to fit flat head screw driver blade.
Supplied with one square nut, hex nuts and washers sold separately.
BZP finish (Bright Zinc Plate).

Roofing Bolt; designed for bolting through metal sheets but have many other uses.
14mm bolt head, with 2mm cross-slots to fit flat head screw driver blade.
Supplied with one square nut, hex nuts and washers sold separately.
BZP finish (Bright Zinc Plate).